G3 Reader Pro – Third generation indoor and outdoor NFC reader and intercom with Apple Touch Pass support.

Overview
– Dimensions: 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6″)
– Integrated camera: Yes
– NFC card and key fob access: Yes
– PIN access: Yes
– Touch Pass: Yes
– Mobile Unlock: Yes
– Two-Way Intercom & Doorbell Access: Yes
– Weatherproof: IP55

Mechanical
– Weight: 136 g (4.8 oz)
– Housing material: Polycarbonate, glass
– Mounting material: Aluminium alloy
– Mounting: Wall and box mounting (included); angle mounting, junction box (optional)

Hardware
– Indoor and outdoor use: Yes
– Ambient temperature: Device: -30 to 45° C (-22 to 113° F); Display: -10 to 45° C (14 to 113° F)
– Operating humidity: 5 to 90 % non-condensing
– Network interface: (1) GbE RJ45 port
– Connectivity: BLE 4.2; NFC
– Power supply method: PoE; UL 294 power-limited class 2 power supply: UL 60950-1/62368-1 LPS/PS2 PSU
– Max. Power consumption: 6 W
– Supported voltage range: 48V DC
– ESD/EMP protection: air: ±15kV, contact: ±8kV
– Sensors: Proximity sensor
– Display: 120 mm (4.7″) diagonal
– Touchscreen technology: Capacitive touch
– Display luminance: 480 nits (typical)
– Screen orientation: Portrait
– Resolution: 1280 x 286 px
– Microphone: Yes
– Speaker: Yes
– LEDs: R/G/B/W/Amber
– Button: (1) Factory reset
– NFC frequency: 13.56 MHz
– NFC read range: < 30 mm (1.18”)
– NFC technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340); MIFARE Classic / MIFARE DESFIRE; Sony FeliCa™ (ID only); NFC Forum Tags T1T, T2T, T3T, T4T and T5T; ECP 2.0
– PoE cabling requirements: Cat 5e cabling is recommended as the minimum power category. The power category used should match the transmission speed required at the installation site. The minimum allowable conductor cross-section for the connection between the PSE or Power Injector and the PD is 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cables.
– UL 294 Level: Destructive Attack: Level I; Line Safety: Level I; Durability: Level I; Standby Power: Level I
– UL 294 Explanation: Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
– CAN/ULC-60839-11-1 Class: Classification: I
– Certifications: CE, FCC, IC,UL 294, CAN/ULC-60839-11-1
– Document number and issue date and/or revision level: UA-G3-Pro-W/UA-G3-Pro-B, V01
– NDAA compliant: Yes

Software
– Management application: Access
– Software information: The software version can be checked at https://unifi.ui.com