Ubiquiti – UA-HUB-DOOR-MINI – Door Hub Mini

Overview
– Dimensions: 113 x 66 x 27.6 mm (4.4 x 2.6 x 1.1″)
– Supported Doors: 1
– Input Terminals: (1) Door exit request (1) Door position
– Power Method: PoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU

Mechanical
– Weight: 190 g (6.7 oz)
– Enclosure Material: Polycarbonate, metal
– Mounting: DIN-rail (Included)

Hardware
– Indoor and Outdoor Use: Indoor only
– Ambient Operating Temperature: 0 to 40° C (32 to 104° F)
– Ambient Operating Humidity: 5 to 90% noncondensing
– Networking Interface: (3) GbE RJ45 ports
– PoE Interface: (1) PoE++ input, 50V DC, 1A (2) PoE outputs, total 31W
– Max. Power Consumption: 19W (Without PoE output) 50W (With PoE output)
– Dry Output Relay: 30V DC, 1A
– Wet Output Relay: 12V DC, 1A
– LEDs: W/B Learn More
– Buttons: (1) Factory-reset (1) Dry/Wet switch

Recommend Max. Cable Length
– UA-Lock-Electric (400mA)
24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
– UA-Lock-Magnetic-540kg (500mA)
24 AWG length: 12 m (29 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (262 ft)
– UA-Lock-Magnetic-270kg (800mA)
24 AWG length: 12 m (29 ft) 22 AWG length: 20 m (98 ft) 20 AWG length: 30 m (167 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
– Other locks (1A)
24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)

– PoE Cabling Requirements: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
– UL 294 Level: Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
– UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade: Grade assignment: I
– Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
– Document number, and issue date and/or revision level: UA-Hub-Door-Mini, V01

Software
– Management Application: Access