Connection to lift reader via PoE to authorise floor selection by the user. Support for up to 18 floors and digital inputs for car status and emergency.

UA-Hub-Elevator Mechanical
– Dimensions 129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3″)
– Weight 537 g (1.2 lb)
– Housing material polycarbonate
– Mounting material polycarbonate

UA-Hub-ElevatorHardware
– Network interface (4) 10/100/1000 Base-T
– Management interface (1) 10/100/1000 Base-T
– Power supply method PoE++
– Max. Power consumption 7 W (without PoE output)
– PoE input (1) PoE++, 50 V DC, 1.2 A
– PoE output PoE passthrough, (4) PoE, 50 V DC, 42 W in total
– ESD/EMP protection air: ±8 kV, contact: ±4kV
– Digital input (6) car position; up/down/stop/full/door open/door closed; (1) emergency
– Outputs (18) relays; rated 30V DC/2A
– LEDs system: white/blue/red
– Output relays: white
– Buttons (1) factory reset; terminal blocks
– Operating temperature -10 to 40° C (14 to 104° F)
– Operating humidity 5 to 95% non-condensing
– Certifications CE, FCC, IC

UACC-Extender-2Wire-Tx/RxMechanical
– Dimensions 40 x 105 x 25 mm (1.6 x 4.1 x 1″)
– Weight PoE in: 77 g (2.7 oz)
– PoE out: 79 g (2.8 oz)
– Housing material polycarbonate
– Mounting material polycarbonate

UACC-Extender-2Wire-Tx/RxHardware
– Network interface (1) 10/100 MbE; (1) Homeplug AV
– Management interface (1) 10/100 MbE
– Power supply method PoE++
– Max. Power consumption 3W (without PoE output)
– PoE input (1) PoE++, 50V DC, Max. 1.2A
– PoE output (1) PoE+, 48V DC, 0.72A
– ESD/EMP protection air: ±8kV, contact: ±4kV
– LED White
– Operating temperature -10 to 40° C (14 to 104° F)
– Operating humidity 5 to 95% non-condensing
– Certifications CE, FCC, IC

UA-G2Mechanical
– Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4″)
– Weight 82 g (2.9 oz)
– Housing material polycarbonate, glass
– Mounting In the wall, in the control box
– Weather protection IP55

UA-G2Hardware
– Network interface (1) 10/100 MbE RJ45 port
– Connectivity BLE 4.1
– Power supply method PoE
– Supported voltage range 48V DC
– Maximum power consumption 5W
– ESD/EMP protection air: ±15kV, contact: ±8kV
– Sensors Proximity sensor
– Speaker (1) 8 Ohm, 0.7W
– LEDs R/G/B/W
– Button (1) factory reset
– NFC frequency 13.56 MHz
– NFC read range < 30 mm
– NFC standards ISO 14443A, 14443B, 15693
– NFC technology NFC Tag 1,2,3,4,5; MIFARE Classic: MIFAREPlus: MIFARE Ultralight; MIFARE DESFire
– Operating temperature -30 to 45° C (-22 to 113° F)
– Operating humidity 5 to 90% non-condensing
– Certifications CE, FCC, IC

UA-CardMechanical
– Dimensions 85.6 x 54 x 0.8 mm (3.4 x 2.1 x 0.03″)
– Weight 5 g (0.18 oz)
– Format ISO 7810 ID-1
– NFC frequency 13.56 MHz
– NFC technology ISO/IEC 14443 Type A
– MIFARE DESFire
– UniFi Access Proprietary Security Protocol

Scope of delivery
– (1) Elevator Hub
– (1) G2 Reader
– (2) 2-wire PoE Extender
– (10) Access Cards