5 GHz wireless bridge with PoE output that establishes connections over 5+ km distance or enables seamless uplinks to UniFi WiFi.

Mechanical
– Dimensions Ø189.5 x 64.3 mm (Ø7.4 x 2.5″)
– Weight Without mount: 431 g (1 lb)
– With mount: 515 g (1.1 lb)
– Housing material: UV-resistant polycarbonate
– Bracket material: UV-stabilised polycarbonate, stainless steel
– Pole mount diameter: 20-53.1 mm (0.8-2.1″) depending on outer tube diameter
– Wind load: 69 N at 200 km/h (15.5 lbf at 125 mph)
– Weather resistance IPX6

Hardware
– Network interface (2) GbE RJ45 ports
– Management interface
– Ethernet
– WiFi
– PoE interface
(1) PoE input (PoE output not used)
(1) Passive PoE output
– Power supply method PoE, PoE+ (required for PoE output)
– Power supply UniFi PoE switch, 48V, 0.32A PoE adapter (included)
– Supported voltage range 42.5-57V DC
– Max. Power consumption 9W
– Max. Transmission power
2.4 GHz –
5 GHz 25 dBm
6 GHz –
– Max. Data rate
2.4 GHz –
5 GHz 867 Mbps (BW80)
6 GHz –
– MIMO
2.4 GHz –
5 GHz 2 x 2
6 GHz –
– Antenna gain
2.4 GHz –
5 GHz 19 dBi
6 GHz –
– Antenna Internal
– Range 5+ km
– LEDs Power, Ethernet, (4) Signal strength
– Factory reset button
– Mounting stand (included)
– Operating temperature -40 to 60° C (-40 to 140° F)
– Humidity 5 to 95% non-condensing
– Certifications CE, FCC, IC

Software
– WiFi Standards 802.11a/n/ac
– Wireless security WPA2 AES (Always On)
– Operating frequency* US/CA
U-NII-1 5150 – 5250 MHz
U-NII-2A 5250 – 5350 MHz
U-NII-2C 5470 – 5725 MHz
U-NII-3 5725 – 5850 MHz
– Worldwide
5150 – 5875 MHz
*Depending on the region.
– Channel bandwidth Channel bandwidth 20/40/80 MHz
– Max. conducted transmission power 25 dBm (combined)
– Modulation BPSK (½), QPSK (½), QPSK (¾), 16QAM (½), 16QAM (¾), 64QAM (2⁄3), 64QAM (¾), 64QAM (5⁄6), 256QAM (¾), 256QAM (5⁄6)