VARIA Group – OPNsense Ready System, APU2E5, 4 GB RAM, 16 GB mSATA SSD module, black

Brand:
VARIA Group

291,71 €

incl. 19% VAT plus shipping costs

OPNsense Ready System – APU2E5, 4 GB RAM, 16 GB mSATA SSD module, black The OPNsense software is based on FreeBSD(R) and is designed to be used as a firewall and router. It includes almost all the functions of expensive commercial firewalls, and in…

Show article information
currently sold out
Out of stock
Bulk PriceQuantity (from)Quantity (to)
291,71 € 1 19
261,41 € 20 49
259,39 € 50 199
257,37 € 200 ∞
SKU 351443
EAN 4251876952269
MPN 351443
Categories , ,
Tags , ,

OPNsense Ready System – APU2E5, 4 GB RAM, 16 GB mSATA SSD module, black

The OPNsense software is based on FreeBSD(R) and is designed to be used as a firewall and router. It includes almost all the functions of expensive commercial firewalls, and in most cases even more. The following functions are provided (excerpt):

  • Firewall
  • Status table
  • NAT
  • Redundancy
  • Outgoing and incoming load balancing
  • VPN – IPsec, OpenVPN, PPTP
  • PPPoE server
  • RRD Graphs Reporting
  • Real-time information – with AJAX
  • Dynamic DNS
  • Captive portal
  • DHCP Server and Relay
  • Live CD version available

The OPNsense software runs on a power-saving APU2E5 system and has a maximum power consumption of 10 watts, which has a minimal impact on the environment. The system is fanless, passively cooled and extremely small (6 x 6″).

APU2E update: The size of the battery socket has been changed to avoid contact problems. Added signal integrity resistor for core voltage control signal.

Scope of delivery:

  • 1x server system
  • 1x 16 GB mSATA SSD module with pre-installed OPNsense software
  • 1x 12 V power supply unit
  • 1x network cable (1 m)
  • 1x housing
  • CPU: AMD Embedded G Series GX-412TC, 1 GHz Quad Jaguar Core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache
  • DRAM: 4 GB DDR3-1333 DRAM
  • Storage: boot from mSATA-SSD, SD card (internal sdhci controller) or external via USB, 1x SATA + power connector
  • 12 V DC, around 6 to 12 W depending on CPU load, built-in socket = 2.5 mm, positive inner conductor
  • Connectivity: 3 Gigabit Ethernet channels (Intel i211AT)
  • I/O: serial DB9 interface, 2x USB 3.0 external + 2x USB 2.0 internal, 3x LEDs on the front, push-buttons
  • Extension: 2x miniPCI-express (1x with SIM connector), LPC bus, GPIO header, I2C bus, COM2 (3.3 V RXD/TXD)
  • Board size: 6 x 6″ (152.4 x 152.4 mm) – like apu1d, alix2d13 and wrap1e
  • Firmware: Coreboot
  • Cooling: Conductive cooling from the CPU to the case with 3 mm thick aluminium heatspreader (included)