20 or more:
35,78 EUR
50 or more:
35,47 EUR
200 or more:
35,15 EUR
500 or more:
34,84 EUR
1000 or more:
34,53 EUR
2500 or more:
34,22 EUR
BPI-M2+ (H3) - Banana Pi BPI-M2+(H3) - Mini Quad-Core H3 Single Board Computer
Deliverytime: 37 - 39 working days (Mo-Fr) *
Product Description
Banana Pi BPI-M2+(H3) - Mini Quad-Core H3 Single Board Computer
Banana Pi is an open source hardware platform. The Banana Pi model BPI-M2+ has a quad-core CPU, an Allwinner H3 chip on board and supports Wi-Fi. It's very small with dimensions of only 65 x 65 mm. It runs Android, Debian Linux, Ubuntu Linux, the Raspbian image and other OS.
The boards hardware include: 1 GHz ARM7 quad-core processor, 1 GB DDR3 SDRAM, 8 GB eMMC Flash and an SDIO Wi-Fi & Bluetooth 4.0 module on board. It also has a Gigabit Ethernet port and can run smoothly with Android 4.4. It supports 1080P high definition videos and games as well as 4K. Its GPIO header is pin-compatible with the Raspberry Pi B+ and supports the Raspbian image.
- CPU: H3 quad-core Cortex A7 H.265/HEVC 4K
- GPU: MALI-400 MP2, runs at 600 MHz, supports OpenGL ES 2.0
- SDRAM: 1 GB DDR3 (shared with GPU)
- GPIO: 40 pins Header, 28x GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S
- Bluetooth: BT4.0
- Onboard storage: TF card (max. 64 GB) / MMC card slot, up to 2T on 2.5 SATA disk, 8 GB eMMC Flash
- Onboard network: 10/100/1000M Ethernet RJ45
- Onboard Wi-Fi: SDIO AP6212 (option AP6181, AP6335)
- Video input:
- CSI input connector camera:
- Supports 8-bit YUV422 CMOS sensor interface
- Supports CCIR656 protocol for NTSC and PAL
- Supports SM pixel camera sensor
- 4 Supports video capture solution up to 1080p (at) 30fps
- Video output:
- Supports HDMI output with HDCP
- Supports HDMI CEC
- Supports HDMI 30 function
- Integrated CVBS
- Supports simultaneous output of HDMI and CVBS
- Audio output: HDMI
- Power source: DC input
- USB 2.0 ports: 2x USB 2.0 hosts, 1x USB 2.0 OTG
- Buttons: Reset, power, uboot
- Low-level peripherals: 40 pins Header, compatible with Raspberry Pi B+
- UART GPIO (1x 3) pin: UART, ground
- LED: Power and status
- IR: IR input on board
- Supported OS: Android, Ubuntu, Debian, Raspberry Pi image
- Product size: 65 x 65 mm
- Weight: 48 g
