RFA-12-A94-CAX-A1 - 19" Wall Cabinet with 3 Sections

Triton RFA-12-A94-CAX-A1 - 19" Wall Cabinet with 3 Sections

The new RFA wall-mounted cabinet is intended for communication
applications of small and medium sized businesses. It is divided into
three installation sections:

Section 1

The first
section allows installation of 19 equipment with a maximum height of 6 U and
depth of 230 mm. The devices are positioned vertically and the 19 rails are adjustable
in fixed positions. Typical installations for this section are a 230 V
distribution system and adapters for active components or incoming data lines.

Section 2

The second
section offers a mounting width of 19, a height of 12 U and a depth of 230 mm.
The mounting rails are infinitely adjustable. This section is usually used for
structured cabling and active elements of the network. Here, individual services
are connected to the work places. The recommended capacity is up to 48 work
places (2 ports per work place according to standards).

Section 3

The third
section occupies the whole bottom area of the wall cabinet. There is space for
devices with a maximum depth of 800 mm, a width of 19 and a height of 2 U. This
section is accessed via a perforated door on the right side of the cabinet.
Beside the cabinet must be kept suffi cient space for the device installation
and maintenance. The installed equipment can be additionally cooled with RAX-CH-X07-X9
fans.

Description

• 19
  wall-mounted cabinet with IP20 protection
• Three separate 19 sections
• Cabinet is to be mounted directly on the wall
• Cabinet includes two adjustable vertical rails in each section
• Cabinet construction:
• Welded frame
• Doors - a combination for different sections: safety hardened glass, thickness
  4 mm (can be fully metal or perforated) solid steel and perforated
• Max. permissible load of the door is 10 kg
• Min. thickness of the surface finish is 65 m
  
  

The cabinets
are intended for the installation of data and telecommunication devices and
their distribution systems. The frame
of the cabinet and all the removable parts (side and rear covers, doors) are connected
by grounding cables that have to be properly fastened and inserted into
connectors during use of the cabinet at all times. There is one M8 screw placed
on the bottom part of the cabinet as a main grounding point. Cable openings
covered with break-out-type blanking panels are placed in the top and the
bottom part of the cabinets rear side, others are on the top and the bottom
side of the cabinet. Openings covered by break-out blanking panels, prepared
for installation of cooling ventilators, are placed in the metal door of the first
section.

Material

• Safety hardened glass 5 mm thick
• Steel sheet
  

Supply

• Key - front door: 4x
• Screw 6x50: 6x
• Washer 6,6: 6x
• Dowel 10: 6x
• Captive nut M6: 8x
• Blanking panel with brush: 1x