NET-PwrCtrl IO - POWER 19"

8 - sockets controlled independently via Ethernet / Internet with the web browser.

• 8 - sockets controlled independently via Ethernet / Internet with the web browser
• Worldwide control
• No software (except web browser) needed to control or adjust the strip
• Can be used from any operating system (with a web browser)
• HTML of the pages can be changed and uploaded to the strip
• Automatic IP assignment: DHCP
• Start time (ready for operation after) 3 seconds
• 8 - Inputs or outputs - freely configurable with edge detection and toggle
• Automatic and time-delayed ( 0-18.2h) switching on of sockets after start (power failure)
• Switching process can also take place as a pulse (0-65535 sec.)
• Switching interval of the relays with simultaneous switching can be determined ((0-255) milliseconds)
• Sockets can be blocked individually
• Wake on LAN
• User system with assignment of rights
• Logbook of the last 128 events. Power failures are registered (remains without voltage)
• UDP, URL & Batch API for integration into own software
• LabView Virtual Instrument for UDP interface
• Multi NET-PwrCtrl Controls all instruments in the network (also as C# source code)
• Firmware upgrade via Ethernet possible at any time (Ethernet Bootloader)
• Sturdy aluminium housing, child-proof locks in the sockets, cable duct
• Sockets (controllable): 8 (8)
• Input/output: 8
• IO connector: DB15
• Rated voltage: 100-240V~ 50-60Hz
• Power consumption: 3.6 W
• Max. Load:
  
  • All total max.: 4600 VA
  • Each socket max.: 2300 VA
• LAN cable: 2 m
• Power cable: 1.9 m
• LAN interface: 10 Base-T,10 MBit/s
• Dimensions: L480 W120 H76mm - 2 U
• Temperature range: -20°C...+60°C
• Humidity: 10 ... 90% non-condensed
• Scope of delivery: power strip, mains cable, Ethernet cable, DB15 plug/adapter