RDA-45-A88-CAX-A1 - Welded Server Cabinet, 45 U, 800 x 800 mm

TRITON RDA-45-A88-CAX-A1 - Welded Server Cabinet, 45 U, 800 x 800 mm

The
RDA data cabinet is intended for servers and active equipment for
computer networks. It is usually supplied with a perforated door to
provide maximum cooling. It is possible to improve cooling by installing
fan units to the roof or to the base section of the RDA cabinet. Cable
entries above the 19 vertical rails are covered with break-out blanking
panels, providing a simple way to connect installed equipment into
larger units. A slightly different version was developed for data
centers.

Loading Capacity 1800 kg

The RDA data
cabinet has a reinforced construction and is made of thicker material.
The 19 vertical rails are also designed for a higher loading capacity. A
version with more than 800 mm depth has a central pair of vertical
rails as a standard solution.

Hook-on Hinges

Our
standard door hinges can be replaced by the new hook-on alternative. The
door can be taken off, which allows an easy installation and
configuration of all installed equipment. These hinges are fully
compatible with previous versions.

Triton Handles

Triton
manufactures their own handles for the free-standing cabinets. By
changing the plastic module (not included), a traditional or
semi-cylindrical lock insert can be used. Patent: PUV 2013-27443

Wider Body Rails

Wider
rails in the body of a cabinet are intended for an additional
installation of 19 power management panels, which saves valuable space
for other equipment. Thanks to this smart solution, pull-out servers
will not be blocked even in the 600 mm cabinet type. In addition to this
solution, the A5 version (at the end of the cabinet code) is
characterized by break-out blanking panels for possible cable input and
management between neighboring cabinets.

Description:

• 19 free-standing cabinet with IP20 protection
• Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
• Cabinet construction:
• Welded steel frame with removable side panels fixed by locks
• Single
  or double doors in either fully metal, perforated (80 % and 86 % air
  permeability) or glazed with safety tempered glass 4 mm. They can be on
  the front or back of the cabinet.
• Preparation for installation of power distribution units to the frame
• Preparation for joining the cabinets together
• A5 version has break-out cable entries in the frame for the cabling between cabinets
• The maximum recommended load of cabinet is 1800 kg, maximum load of the door is 20 kg.
• Min. thickness of the surface finish is 65 µm.
• The
  racks are designed for installation of data and telecommunication
  equipment and distribution systems. The frame of the cabinet and all the
  removable parts (side and rear covers, doors) are connected with
  grounding cables that have to be properly fastened and inserted into
  connectors during use of the cabinet at all times.
• There is one M8 screw placed on the bottom part of the cabinet as the main grounding point.
• Can be mounted on castors and leveling feet.

Size in mm:

• 2105 x 800 x 800

Supply:

• Key - rear and side panels: 2x
• Key - front door: 2x
• Captive nut M6: 16x
• Blanking panel with brush: 1x
• Fringe edge: 1 m
• Leveling feet: 4x
• Nut M10: 4x

Material:

• Safety hardened glass 4 mm thick
• Steel sheet