RDA-47-L68-CAX-A3-GDA - 19" Data Center Cabinet, 47 U, 600 x 800 mm

TRITON RDA-47-L68-CAX-A3-GDA - 19" Data Center Cabinet, 47 U, 600 x 800 mm

The
data center version of RDA cabinets combines the high loading capacity
with the requirements specific to this type of installation. Cabinets
are ready for assembly into larger units and the installation into
hot/cold aisle containments.

Loading Capacity 1800 kg

The
RDA data cabinet has a reinforced construction and is made of thicker
material. The 19 vertical rails are also designed for a higher loading
capacity. A version with a depth of more than 800 mm has a central pair
of vertical rails as a standard solution.

Ready for Containment Installation

For
mounting the hot or cold aisle roof, the data center version of RDA has
a modified front without the beveled edge typical for Triton cabinets.
Models designed for data centers are labeled A3 and A7. Model A7 also
has cable entries in the frame for patching cables between racks secured
by blanking panels.

Hook-on Hinges

Our standard
door hinges can be replaced by the new hook-on alternatives. The door
can be taken off, which allows an easy installation and configuration of
all installed equipment. These hinges are fully compatible with
previous versions.

80% Door Perforation

RDA is a
cabinet designed for mounting servers and other active elements that
requires good cooling. Therefore, it is most often supplied with a
perforated front door. The rear doors are usually also perforated and
double-winged. By taking the door off its hinges, one has comfortable
access for installation and maintenance of installed equipment. PATENT:
PUV 2012-26481.

Joining of Cabinets

The RDA cabinet is equipped with mounting holes for easy joining. It can be combined with standard Triton racks (RMA, RZA).

19 Vertical Rails

The
19 vertical rails designed for equipment installation are freely
adjustable in the entire depth of the cabinet. A cabinet deeper than 800
mm has an additional central pair of vertical rails as a standard
solution.

Power Distribution Unit Inside of Cabinet Frame

19
power distribution units by Triton can be mounted into the corners
inside the cabinet using the supplied brackets. That way, they do not
take up valuable space for other equipment.

Opening for Cooling Air

In
the bottom of the cabinet, there is a large opening for cable entries
and cooling air from beneath the raised floor. These RDA models (A3 and
A7) are placed directly on the floor without leveling feet.

Multi-point Locks

Together with the srew-fastened side panels, Tritons multi-point lock mechanism increases the safety of installed equipment.

Description:

• 19 free-standing cabinet with IP20 protection
• Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
• Cabinet construction:
• Welded steel frame with removable screw-fastened side panels
• Single
  or double doors either fully-metal, perforated (80% air permeability)
  or glazed with safety tempered glass 4 mm. They can be on the front or
  back of the cabinet.
• Preparation for installation of 19 power distribution units to the frame
• Preparation for joining the cabinets together
• Preparation for hot/cold aisle containment and sliding door installation
• The maximum recommended load of the cabinet is 1800 kg, maximum load of the door is 20 kg.
• Finishing of polyester powder coating, min. coating thickness of 65 m.
• The racks are designed for installation of data and telecommunication equipment and distribution systems.
• The
  frame of the cabinet and all the removable parts (side and rear covers,
  doors) are connected with grounding cables that have to be properly
  fastened and inserted into connectors during use of the cabinet at all
  times.
• There is one M8 screw placed on the bottom part of the cabinet to connect the bonding.
• Cable entries covered by blanking panels secured by screws are located in the upper cabinet part.

Size in mm:

• 2194 x 600 x 800