PHI_PST02-1C - 3-in-1 Sensor (Door/Window, Temperature, Brightness)

3-in-1 Sensor (Door/Window, Temperature, Brightness)

With the 3-in-1 Sensor PST02-1C by Philio you can not only monitor your doors and windows status, because the device is equipped with 3 different sensors in total:

• Door/Window Sensor
• Temperature Sensor
• Light Sensor

The sensor consists of two parts: a detector and a magnet. The Magnet should be mounted on the doors/windows opening part and the detector on the fixed frame. Opening the door/window will remove the magnetic field, trigger the detector and generate an alarm condition, (if the system is armed).

The sensor can also be used for automatic light control, one possible scene is to get the illumination lux level from built-in light sensors and send a signal to Z-Wave control center to turn the light on once the door will be opened when the room is dark. Every time, when the door/window sensor triggers a status change, it will also send temperature and brightness value.

Features:

• Contact sensor monitors door and window status (open/closed)
• Measures and reports additional values for temperature and brightness
• Tamper protection
• Can be mounted on every planar surface in vertical or horizontal position
• Firmware update Over The Air (OTA)
• Power Supply: Batterie (1x CR123A)
• Wireless Technology: Z-Wave Plus
• Dimensions: 28 x 95 x 35 mm
• Article Dimensions (WxHxL): 28 x 95 x 35 mm
• Package Dimensions (WxHxL): 67 x 131 x 26 mm
• Article net weight: 0.047 Kg
• Article gross weight: 0.081 Kg
• WEEE
• CE