ZWA019 - Water Sensor 7 Pro, Z-Wave

ZWA019 - Water Sensor 7 Pro

The AEOTEC Water Sensor 7 Pro is a sensor which detects water leakage and measures temperature and humidity. The sensor is easily retrofittable.

Thanks to its slim design the AEOTEC Water Sensor 7 Pro can be installed in any bathroom, behind a kitchen sink or in any other tight space. The sensor just has to be installed on the wall and the sensor probe must be put on the floor.

By using the internal temperature and humidity sensor, the device will report on any significant change.

Tripple clicking the tamper button includes (adds) and excludes (removes) the device. A single click on the button will wake up the device. The device supports the Z-Wave Security S2 framework with authenticated and unauthenticated network keys. Please follow the instructions on the central controller when including. The device also supports Smart Start.

• Dimensions: 28 x 95 x 35 mm
• Hardware platform: ZGM130S
• IP class: IP 20
• Battery type: 1x 1/2 AA
• Device type: Notification sensor
• Generic device class: Sensor notification
• Specific device class: Routing sensor notification
• Network operation: Reporting sleeping slave
• Firmware version: 01.00
• Z-Wave version: 07.12
• Certification ID: ZC12-20060075
• Frequency: Europe - 868,4 MHz
• Maximum transmission power: 5 mW