CME22-2N-BG77 - CME Gateway - IoT gateway with 650MHz CPU, 64MB RAM

Tired of the limitations of wired sensors? Wouldn't it be nice if older devices - like electricity meters - could send their data over the mobile network, just like our phones do? With the CME gateway, you can do just that - and more!

It has two Ethernet ports, an integrated CPU, some RAM and the crown jewel: a powerful integratedCAT-M narrowband LTE modem. For an extremely efficient, low-cost, low-bandwidth mobile internet connection. Sure, narrowband can't be used to stream YouTube videos, but it serves another purpose: it provides better network coverage and transmits data via the world's cheapest data tariffs.

Thanks to its IP66 waterproof rating, the rugged device cansurvive a variety of harsh environments and setups: damp attics, rainy forests, agricultural equipment and so on. It has a PoE input, a PoE output and a 2-pin DC connection fora convenient power supply. And to make management even easier, we've added a simple single-chain 2.4 GHz wireless so you can use the MikroTik smartphone app to configure everything.

Another fun bonus: The board supports GPS. So if you know your way around RouterOS scripts, you can also collect weekly, daily or even hourly location data!

Specifications
- Product code: CME22-2n-BG77
- Architecture: MIPSBE
- CPU: QCA9531
- CPU core count: 1
- CPU rated frequency: 650 MHz
- Switch chip model: QCA9531
- RouterOS licence: 4
- Operating system: RouterOS v7
- RAM size: 64 MB
- Memory size: 16 MB
- Memory type: FLASH MTBF
- Approximately 100,000 hours at 25C
- Tested ambient temperature: -40°C to 70°C

Power supply
- Number of DC inputs: 2 (2-pin connector, PoE-IN), 2-pin terminal input voltage 12-57 V
- Maximum power consumption: 31 W
- Maximum power consumption without additional devices: 6 W
- PoE in: 802.3af/at
- PoE input voltage: 18-57 V

PoE output
- PoE outputs: Ether2
- PoE output: 802.3af/at
- Maximum output power per port (input 18-30 V): 600 mA
- Maximum output power per port (input 30-57 V): 450 mA
- Maximum total output power (A): 0.6 A

Wireless specifications
- Wireless 2.4 GHz Maximum data rate: 150 Mbit/s
- Wireless 2.4 GHz Number of chains: 1
- Wireless 2.4 GHz Standards: 802.11b/g/n
- Antenna gain for 2.4 GHz: 2 dBi
- Wireless 2.4 GHz chip model: QCA9531
- Wireless 2.4 GHz generation Wi-Fi: 4

Ethernet
- 10/100 Ethernet ports: 2

Peripherals
- Number of SIM slots: 1 modem (nano SIM)

Certification & approvals
- Certification: CE, FCC, IC, EAC, ROHS
- IP: 66

Contents
- 1x 48 V 0.95 A power supply
- 1x Gigabit PoE injector
- 1x metal ring (one)