USB 5 Gbps docking station for 4 x SATA HDD / SSD with clone function

This HDD / SSD docking station from Delock is used for the external connection of up to four 2.5″ or 3.5″ SATA HDDs / SSDs via the USB interface, as well as the simple exchange of the drives through hot swap.
Furthermore, it is possible to connect a single hard drive to the computer using the eSATA connection.

Up to four HDDs or SSDs can be used and accessed at the same time.
With the clone function, the content of an HDD / SSD can be copied to one or more hard disks without using a PC.

Due to the USB connection and the included USB cable, the docking station can be easily connected to the computer. In addition, the power supply unit included in the scope of delivery ensures a sufficient power supply for the storage devices used.

Specification

• Connectors:
• 4 x SATA 22 pin female
• 1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-B female connector
• 1 x eSATA 7 pin male
• 1 x DC power socket
• Chipset: Genesys Logic GL3523, JMicron JMS578
• Function keys:
• 1 x Clone button
• 1 x on/off switch
• For 2.5″ and 3.5″ SATA HDDs / SSDs
• Suitable for all SATA HDDs / SSDs up to SATA 6 Gb/s
• Data transfer rate up to 3 Gb/s
• 5 x LED display
• LED display for power, access and copy status
• Bootable (eSATA)
• Dimensions (LxWxH): approx. 166 x 127 x 65 mm
• Hot swap, plug & play

Power supply specification

• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 2 A
• Output: 12 V / 6.5 A
• Ground outside, plus inside
• Dimensions:
• inside: ø approx. 2.1 mm
• outside: ø approx. 5.5 mm
• Length: approx. 10 mm

System requirements

• Chrome OS
• Linux Kernel 3.17 or higher
• Mac OS 10.14.2 or higher
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or notebook with a free USB Type-A port

Package contents

• Docking station
• 1 x cable USB 3.0 A plug to USB 3.0 B plug, length approx. 80 cm
• External power supply unit
• Instruction manual

Packaging

• Retail Box