62756 - Navilock NL-82002U USB 2.0 Multi GNSS UDR receiver u-blox NEO-M8U 1.5 m

The USB 2.0 Multi GNSS UDR receiver from Navilock with the u-blox NEO-M8U chipset has a built-in active antenna and highly sensitive sensors, such as a 3D accelerometer and a 3D gyroscope. In conjunction with a notebook, reliable positioning is possible even if the GNSS signal is interrupted.

Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!

Specification
- Connection: USB 2.0 Type-A plug
- Chipset: u-blox NEO-M8U
- Frequency GPS: L1, 1575.4200 MHz
- Frequency GLONASS: L1, 1602 (k x 0.5625) MHz
- Frequency BEIDOU COMPASS: B1, 1561.0980 MHz
- Frequency GALILEO: E1, 1575.4200 MHz
- Frequency QZSS: L1, 1575.4200 MHz
- Processes signals from up to 72 satellites simultaneously
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Supports UDR from NMEA 4.1
- Auto baud rate up to 115200 bps
- Update rate: up to 20 Hz
- Sensitivity max. -160 dBm
- IPX6 protection class
- Magnetic and non-slip housing underside
- LED display for GPS status
- Operating temperature: -20 °C ~ 60 °C
- Cold start in approx. 26 seconds
- Hot start in approx. 1 second
- Position accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: approx. 1.5 m
- Dimensions (LxWxH): approx. 65 x 45 x 22 mm
- Microsoft Sensor and Location Platform (Internet)
- Compatible with Windows application software (e.g. - weather, maps, etc.)
- Realise GNSS positioning platforms via API (32bit)

System requirements
- Windows Vista/7/8/8.1/10, Linux Kernel 2.6
- PC or notebook with a free USB Type-A port
- For devices with OTG function and optional OTG adapters: Windows 10

Package contents
- USB 2.0 receiver
- Navilock support CD incl. drivers and
- Operating instructions