42013 - USB 3.2 Gen 2 enclosure for PlayStation®5 with M.2 NVMe slot, tool-free

This enclosure from Delock enables the installation of an M.2 PCIe NVMe SSD in2280, 2260 and 2242 format. It is connected directly to the PS5with the two USB type-A connectors. The robust metal housing with ventilation slots onthe sides ensures an optimal temperature of the memory.

Additional USB type-A port
This port is directly forwarded from the PlayStation® . Thus, the USB Type-A socket on the enclosure can still be used to connect further USB devices orto charge the controller of the game console.

USB extension cable
The enclosed extension cable can be used to connectthe enclosure to a PlayStation®4 andthus copy games to the M.2 SSD and then use it on the PS5.
The cable can also be used to connect the enclosure to a PC or notebook.

SSD installation without tools
The special feature of this enclosure is that no tools are required toinstall the M.2 SSD. The cover can be pushed back with a little pressure, the SSD is attached to the board with a rubber nipple and then the cover is pushed back on until it clicks into place.

Note
SATA M.2 SSDs are not supported.

Specification
- external connections: 2 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type-A male, 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type-A female
- internal connections: 1 x 67 Pin M.2 Key M Slot
- Supports M.2 2280, 2260 and 2242 format modules with Key M or Key B+M on PCIe (NVMe) basis
- Maximum height of components on module: 1.5 mm, use of double-sided modules possible
- Supports NVM Express (NVMe)
- Supports UASP
- Supports TRIM
- Supports S.M.A.R.T.
- Data transfer rate up to 10 Gbps
- LED display for power and access
- Metal housing
- Dimensions (LxWxH): approx. 120 x 45 x 15 mm
- Hot Plug, Plug & Play

System requirements
- PlayStation®5
- PlayStation®4 (with cable)
- Windows 10/10-64/11
- PC or notebook with a free USB type-A port

Package contents
- External housing M.2
- Cable USB type-A plug to type-A port to type-A port to type-A port to type-A port to type-A port to type-A port. Cable USB type-A plug to type-A socket, length approx. 30 cm
- 2 x heat conducting pads
- 1 x heat conducting plate
- 2 x rubber nipples
- Operating instructions