Home glass wall switch GEN 5 (2 buttons)

The MCO Home glass wall switch GEN 5 with 2 buttons is a glass wall switch with 2 integrated switching relays and scene control. It is operated via 2 touch switches, which are integrated into the glass surface, and via Z-Wave radio commands. The relays can switch 2 separate loads with a maximum of 1,100 watts each. In addition to switching these directly connected loads, the device can also be used to control 2 groups of associated devices. Blue LEDs behind the switching buttons on the glass surface indicate the switching status.

The wall switch can be easily connected to up to two electrical loads without having to install separate flush-mounted modules. The relays are located in a module that is installed directly behind the glass surface. This means that a conventional switch insert or changeover switch is completely replaced by the MCO Home wall switch. The wall switch can be mounted on any standard flush-mounted box.

With the elegant MCO Home glass wall switches, you can easily integrate existing electrical installations such as ceiling or wall lighting into your home automation network. Without having to lay new cables, you can switch your lighting as usual via wall switches - but thanks to Z-Wave radio also via remote control, smartphone and sensor-controlled automatic.

Specifications

• Wall switch with 2 integrated relays and scene control
• Stylish glass touch switch (white) with two buttons
• Ready for installation, incl. glass frame
• Replaces complete wall switch
• 2 relays with 1.100W / 230VAC each
• Integrated status LED
• Controls associations
• For three-wire systems (3-wire), neutral conductor required
• Radio technology: Z-Wave Plus

Further data

• Article dimensions (WxHxL): 86 x 86 x 39 mm
• Item weight (gross): 0.273 kg
• Z-Wave Plus
• WEEE
• CE
• IP class: IP20