UP-SENSE - Smart multi sensor, 1-Pack

Ubiquiti UP-Sense - Smart multi sensor, 1-Pack

The UniFi Protect Smart Sensor is a battery-operated smart multi-sensor that detects motion and environmental conditions.

The Sensor transmits sensory data and alerts over Bluetooth to the UniFi Protect ecosystem.

Note: One of the following UniFi6 access points is required to adopt and operate the smart sensor:

• UniFi6 Long-Range (U6 LR) - Only GA models updated to Version 5.60.23 and later
• UniFi6 Lite (U6 Lite) - Only GA models updated to Version 5.60.23 and later
• UniFi6 Pro (U6 Pro) - Only GA models updated to Version 6.0.4 and later

Mechanical

• Dimensions: Ø24 x 83.5 mm (Ø0.94 x 3.29")
• Weight: 50.2 g (1.77 oz)
• Enclosure materials: Polycarbonate
• Mount materials: Flat wall mount: Polycarbonate, adhesive; Corner mount: Polycarbonate, adhesive
• Additional gear: Magnet, Water sensor adapter (only available in the three-pack at general release)

Hardware

• Processor: MCU Processor at 40 MHz
• Management interface: UniFi Protect
• Networking interface: Bluetooth 5.0, BLE
• Antenna: 2.4GHz
• Antenna gain: 0.5 dBm
• Max. TX power: 5 dBm
• Max. power consumption: 77 mW
• Power method: Lithium battery CR123A
• Sensor features: Motion sensor (5 m/16 ft maximum range), Magnetic entry sensor for door or window open/close, Accelerometer for garage door open/close, Temperature sensor, Humidity sensor, Ambient light sensor, Alarm sound sensor, Water sensor for detecting leaks and floods (requires water sensor adapter accessory, only available in three-pack at general release), BLE connectivity from access point in indoor setting (recommended range 15 m/49 ft, performance will vary based on environment)
• Button: Factory reset
• LEDs: R/B/W
• Operating temperature: 0°C to 45°C (32°F to 113°F)
• Operating humidity: 10 to 90% non-condensing
• Certifications: FCC, IC, CE