UA-INTERCOM - Access intercom, indoor/outdoor intercom station

Indoor and outdoor intercom terminal for managing access requests for residential and commercial buildings.

Details
- Unlocking with NFC card, UniFi Identity Mobile App, PIN code or QR code
- Directory and doorbell for access request
- Coupling with multiple UniFi Intercom Viewers for remote access control
- Connection to the UniFi Access Hub series via PoE
- Weatherproof (outdoor -30 to 60° C)

Mechanical
- Dimensions: 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
- Weight: Device: 965 g (2.1 lb)
- Mount: 445 g (1 lb)
- Housing material: Aluminium alloy, UV-stabilised polycarbonate, glass
- Mounting material: Powder-coated stainless steel
- Mounting: Wall bracket, adapter for gooseneck base (included)
- Surface-mounted angle mounting, flush-mounted (optional)
- Sun protection kit (optional)
- Weather protection: IP65

Hardware
- Network interface: (1) GbE RJ45 connection
- Connectivity: Bluetooth 4.2 / NFC
- Power supply method: PoE
- Supported voltage range: 48V DC
- Max. Power consumption: 13W
- ESD/EMP protection: Air: ±15kV, Contact: ±8kV
- Sensors: Proximity sensor / ALS sensor
- Camera 3264 x 2448, 8 MP / H: 79.4°, V: 97.5°, T: 118.2°
- Display 177 mm (7") diagonal
- Resolution 1024 x 600 (16:9)
- Display: Luminance max. 1000 nits (typical)
- Touchscreen technology: Capacitive multi-touch
- Microphone: Yes
- Speaker: (1) 4 Ohm, 2 W
- LEDs (1) LCM low temperature indicator: orange (LCM switches off when the temperature is below -25° C, but the system functions normally)
- (1) LED floodlight
- (13) LED backlight of the keypad
- Button (1) factory reset
- NFC frequency: 13.56 MHz
- NFC read range: < 30 mm
- NFC standards: ISO 14443A, 14443B, 15693
- NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFARE Plus, MIFARE Ultralight, MIFARE DESFire
- Operating ambient temperature device: -30 to 60° C (-22 to 140° F)
- Display:* -25 to 60° C (-13 to 140° F)
- Certifications: CE, FCC, IC

Software
- UniFi Access management application: version 1.22.17 and higher

*The display will turn off if the ambient temperature is above/below the operating temperature of the display, but other functions will remain functional. (Valid from firmware version 1.0.66)
Operating humidity 5 to 90 % non-condensing