UISP-FIBER-XGS - UISP Fiber XGS, Optical Network Terminal

An optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km.

• 1x XGS-PON port
• 1x 10 GbE RJ45 LAN port

Note: This device is only compatible with the UISP Fiber XGS OLT. It cannot be used with third-party OLTs.

Mechanical

• Dimensions: 100 x 100 x 27 mm (3.9 x 3.9 x 1.1")
• Weight: 220 g (0.49 lb)
• Enclosure material: UV-stabilized polycarbonate

Hardware

• Networking interface: 1x SC/APC, ITU-G.9807 XGSPON WAN port; 1x 100/1.000/2.500/5.000/10.000 MbE RJ45 LAN ports
• Management interface: Ethernet in-band, PON
• Memory: 256 MB DDR
• Onboard Flash storage: 32 MB NOR
• Max. power consumption: 8 W
• Power method: USB-C 5 V DC, 3 A
• Power supply: 5 V DC, 3 A power adapter
• Supported voltage range: 5 V DC power adapter
• Total non-blocking line rate: Downstream: 9.95 Gbit/s; Upstream: 9.95 Gbit/s
• Normal TX range of optical module: 4 to 9 dBm
• Normal RX range of optical module: -9 to -26 dBm
• Button: 1x Factory reset
• Operating temperature: -15°C to 45°C (5°F to 113°F)
• Operating humidity: 10 to 95% non-condensing
• Certifications: CE, FCC, IC

Fiber

• Operating wavelength: TX: 1,270nm; RX: 1,577nm
• Line code: Scrambled NRZ
• Physical reach: 20 km

LEDs

• Power: White: ON
• Ethernet: Steady white: Link up; Blinking white: Activity; Off: Link down
• PON status: 3x signal LEDs; All Off: Bootup; 1x orange: Signal too low (< -27 dbm); 1x white: Signal low (>= -27 dbm); 2x white: Signal good (>= -24 dbm); 3x white: Signal strong (>= -12 dbm); 1x orange + 2x white: Signal too strong (>= -9 dbm); 3x orange: No signal; LEDs alternate between orange + white + orange and a signal strength indicator: No authority

Software

• Management application: UISP: Version 1.5.7 and later