AF60-XG-EU - AirFibre 60 GHz 10 Gbps point-to-point bridge

AF60-XG - AirFiber 60 GHz 10 Gbps point-to-point bridge

The airFiber 60 XG (AF60 XG) is a 60 GHz point-to-point bridge (PtP) with integrated 5 GHz backup. The AF60 XG delivers low-interference, low-latency throughput, making it an ideal component for carrier backhaul. It also features integrated GPS and a Bluetooth management radio to simplify setup and configuration.

Mechanical
- Dimensions: 779 x 664 x 383 mm (30.68 x 26.14 x 15.06")
- Weight: Without mount: 8.6 kg (19 lb); With mount: 13 kg (28.7 lb)
- Housing materials: UV-stabilised polycarbonate, steel
- Bracket material: Galvanised steel
- Bracket: Precision alignment kit (included); Mast compatibility: Ø40-80 mm (Ø1.5-3.15")
- Wind load: 422 N at 200 km/h (94.86 lbf at 125 mph)

Hardware
- Processor: quad-core ARM® Cortex® A72 with 1.6 GHz
- Memory: 2 GB DDR4
- Network interfaces: (1) GbE RJ45 port, (1) 1/10G SFP+ port
- Button: factory reset
- RF ports: Internal
- Max. Power consumption: 31.2 W
- Power supply method: Passive PoE 4 pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2 pairs (4, 5+; 7, 8-)
- Power supply: 48 V DC, 0.65 A Gigabit PoE adapter (included)
- Supported voltage range: 48 V DC ± 10%
- Operating temperature: -40°C to 55°C (-40°F to 131°F)
- Operating humidity: 5 to 95% non-condensing
- Certifications: FCC, IC, CE, Terragraph

LEDs
- Power: Flashing white: booting in progress; White: Not connected to UISPâ„¢ console; Blue: Connected to UISP console
- Ethernet: Flashing blue: Ethernet activity
- GPS: Blue: At least (4) GPS satellite signals are being received
- 60G: Blue: Active connection
- 5G: Blue: Active connection

System
- Maximum throughput: 5 GHz: 866.6 Mbps; 60 GHz: 3.8 Gbps/6 Gbps (with channel bonding enabled)
- Maximum range: 4 km
- Encryption: WPA2-PSK (AES)

Software
- OS: airFiber®
- Modes: PtP only
- Services: UISP, Ping watchdog, NTP client, system log
- Utilities: Antenna alignment tool, detection utility, ping, speed test
- Management interface: Bluetooth management for easy setup via UISP app; WEB UI
- Minimum software requirements: Modern web browser or Android/iOS smartphone

RF
- Operating frequency: 57 to 66 GHz (depending on region)
- GPS: Yes
- Channel bandwidth: 2160 MHz/4320 MHz (with channel bonding enabled)
- Operating channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800 MHz (depending on channel bandwidth)

Back-Up RF
- Operating frequency: US/CA: U-NII-1 5150 - 5250 MHz, U-NII-3 5725 - 5850 MHz; worldwide: 5150 - 5875 MHz (depending on regulatory region)
- Channel bandwidth: 20/40/80 MHz