EDS-405A-MM-ST-T - Entry-level managed Ethernet switch with 3 10100BaseT(X) ports, 2 100BaseFX mult

Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)
- 3
- Auto negotiation speed
- Full/Half duplex mode
- Auto MDI/MDI-X connection
100BaseFX Ports (multi-mode ST connector)
- 2
Standards
- IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.3x for flow control
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1p for Class of Service
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1w for Rapid Spanning Tree Protocol

Ethernet Software Features

Filter
- 802.1Q VLAN
- GMRP
- GVRP
- IGMP v1/v2
- Port-based VLAN
Industrial Protocols
- EtherNet/IP
- Modbus TCP
Management
- Back Pressure Flow Control
- BOOTP
- DHCP Option 66/67/82
- DHCP Server/Client
- Flow control
- IPv4/IPv6
- LLDP
- Port Mirror
- RARP
- RMON
- SMTP
- SNMP Inform
- SNMPv1/v2c/v3
- Syslog
- Telnet
- TFTP
MIB
- Bridge MIB
- Ethernet-like MIB
- MIB-II
- P-BRIDGE MIB
- RMON MIB Groups 1, 2, 3, 9
- RSTP MIB
Redundancy Protocols
- RSTP
- STP
- Turbo Chain
- Turbo Ring v1/v2
Time Management
- NTP Server/Client
- SNTP

Switch Properties

IGMP Groups
- 256
MAC Table Size
- 2 K
Max. No. of VLANs
- 64
Packet Buffer Size
- 1 Mbits
Priority Queues
- 4
VLAN ID Range
VID 1 to 4094

Serial Interface

Console Port
- RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration

Ethernet Interface
- Turbo Ring, Master, Coupler, Reserve

Input/Output Interface

Alarm Contact Channels
- Relay output with current carrying capacity of 1 A @ 24 VDC

Power Parameters

Input Voltage
- 12/24/48 VDC
- Redundant dual inputs
Operating Voltage
- 9.6 to 60 VDC
Input Current
- 0.594 A @ 12 VDC
- 0.286 A @ 24 VDC
- 0.154 A @ 48 VDC
Overload Current Protection
- Supported
Reverse Polarity Protection
- Supported
Connection
- 1 removable 6-contact terminal block(s)

Physical Characteristics

Housing
- Metal
IP Rating
- IP30
Dimensions
- 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight
- 650 g (1.44 lb)
Installation
- DIN-rail mounting
- Wall mounting (with optional kit)

Environmental Limits

Operating Temperature
- -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
- 5 to 95% (non-condensing)

Standards and Certifications

Safety
- UL 508
- UL 60950-1
- EN 62368-1
EMC
- EN 55032/35
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
Hazardous Locations
- ATEX
- Class I Division 2
Railway
- EN 50121-4
Traffic Control
- NEMA TS2
Vibration
- IEC 60068-2-6
Shock
- IEC 60068-2-27
Freefall
- IEC 60068-2-31
Maritime
- DNV

MTBF

Time
- 1,429,327 hrs
Standards
- Telcordia (Bellcore), GB