ICF-1150-M-SC-IEX - Industrial RS-232422485 to multimode fibre optic converter, SC connector

Moxa's industrial-grade serial to fibre converters can convert RS-232/422/485 to fibre, providing users with an easy and reliable way to communicate with their serial devices.

Industrial RS-232/422/485 to multimode fibre optic converter, SC connector, IECEx, 0 to 60°C operating temperature

Serial interface
- Number of connections Ports 2
- Serial standards
RS-232
RS-422
RS-485
- Baud rate 50 bps to 921.6 kbps (supports non-standardised baud rates)
- Flow control ADDC (automatic data direction control) for RS-485
- Connection
5-pin terminal strip
Multimode SC connection
- Pull high/low resistor for RS-485
150 kilo-ohms, 10 kilo-ohms, 4.7 kilo-ohms, 3.3 kilo-ohms, 1 kilo-ohm, 909 ohms, 822 ohms, 770 ohms, 500 ohms, 485 ohms
- RS-485 data direction control ADDC (automatic data direction control)
- Terminating resistor for RS-485 N/A, 120 Ohm, 120 Kilo-Ohm

Serial signals
- RS-232TxD, RxD, GND
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2wData+, Data-, GND

Performance parameters
- Input current 264 mA @ 12 to 48 VDC
- Input voltage 12 to 48 VDC
- Number of current inputs 1
- Supported overload protection
- Power connection terminal block
- Current consumption 264 mA @ 12 to 48 VDC

Physical properties
- Metal housing
- Protection class IP30
- Dimensions 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
- Weight 330 g (0.73 lb)
- DIN rail mounting

Environmental conditions
- Operating temperature 0 to 60°C (32 to 140°F)
- Storage temperature (including packaging)-40 to 85°C (-40 to 185°F)
- Ambient relative humidity 5 to 95% (non-condensing)

Standards and certifications
- EMC EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
- Environmental testing
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
- Safety UL 61010-2-201
- VibrationIEC 60068-2-6
- Hazardous areas
UL/cUL Class I Division 2 Groups A/B/C/D
ATEX Zone 2
IECEx

MTBF
- Time 792.085 hrs
- Standards Telcordia (Bellcore), GB