VPORT P06-2M80M - EN 50155, 1080P, H.264MJPEG IP camera with M12 connector, 1 built-in microphone

Introduction
The VPort 06-2 cameras are compact, 1080P (1920 x 1080), H.264/MJPEG dome IP cameras designed for mobile video surveillance applications. The cameras are compliant with EN 62262 IK8, the mandatory sections of EN 50155 and support an operating temperature range of -25 to 55°C or -40 to 70°C. With a robust M12 Ethernet connector, an SDXC slot for SD cards up to 1TB, ONVIF Profile S standardisation, integrated audio line connector or microphone, PoE or 24VDC power inputs, IP66 certification and the ability to change the lens, the VPort 06-2 cameras operate reliably in a variety of extreme environmental conditions, making them suitable for a wide range of mobile video surveillance applications.

VPort P06-2M80M
VPort 06-2 Series
EN 50155, 1080P, H.264/MJPEG IP camera with M12 connector, 1 built-in microphone, PoE, 8.0 mm lens, -25 to 55°C operating temperature

Memory
microSD Slot: SDXC

Input/output interface
Digital input channels: 1
Digital inputs: +13 to +30 V for state 1, -30 to +1 V for state 0, Max. input current: 8 mA, Max. input current: 8 mA. Input current: 8 mA
Connector: 5-pin A-coded M12 connector with 20 cm cable

Ethernet interface
PoE ports (10/100BaseT(X), M12 D-coded 4-pin socket): 1

Ethernet software functions
Protocols:
TCP/IP
IPv4/IPv6
UDP
HTTP
RTP/RTSP
ARP
UPnP
FTP
TFTP
NTP Client
DNS
QoS
IGMP v3
ICMP
SNMPv1/v2c/v3
DHCP Opt66/67
HTTPS
SIP

Security functions
- Password: Password protection at user level
- Filter: IP address
- Encryption: HTTPS, SSH

Power parameters
- Number of power inputs: 1
- Power source: PoE (IEEE 802.3af)
- Input current: 0.17 A @ 48 VDC

Camera features
-Sensor: 1/3-in 1080P progressive scan CMOS
-Lens: f=8.0 mm, F1.6, diagonal 42°, horizontal 33°, vertical 17°
-Minimum illumination: colour: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
-Synchronisation: Internal
-White balance: ATW/AWB
-Electronic shutter: Auto, fixed (1/30 to 1/25000 s)
-Noise ratio: Maximum 50 dB (AGC off; DNR on)
-DNR (digital noise reduction): Built-in 2D/3D DNR
-WDR (wide dynamic range): 100 dB
-AGC (automatic gain control): 2X, 4X, 8X, 16X
-Flicker-free control: automatic, 50 Hz, 60 Hz modes
-Image rotation: flip, mirror, 90°, 180°, 270° rotation
-Image adjustment: manual adjustment with saturation, sharpness and contrast
-Camera angle: pan: ±15°, tilt: 0° to 90° (manually adjustable)

Video interface
Video compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video output: via Ethernet
Video streams: 4 independent H.264 or MJPEG video streams
Video resolution and FPS (frames per second)

Video viewing:
DynaStreamâ„¢ support for automatic change of video frame rate
CBR Proâ„¢ for good image quality for transmissions with limited bandwidth
3 areas for data protection masks
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Maximum 10 simultaneous unicast connections, 50 multicast clients

Audio interface
Audio format: mono, PCM (G.711), AAC
Audio inputs: 1 x built-in microphone

Development of the camera software
Video standards: ONVIF Profile S

Functions of the camera alarm software
Intelligent video: Detection of camera tampering
Video motion detection: 3 independently configurable areas
Scheduling: Daily repeating schedule
Imaging: JPEG snapshots for pre/trigger/post-alarm images
Custom alarms: HTTP event server for setting custom alarm actions
FTP messaging: Automatic transfer of saved images via FTP as event-triggered actions
Pre-alarm buffer: 50 MB video buffer for JPEG snapshots
Video recording: Event recordings are saved on the SD card

Software requirements
Memory size: 2 GB
Operating system: Windows 7 or higher
Browser: Internet Explorer 9.x or higher
Multimedia: DirectX 9.0C or higher

Physical properties
-Housing:
IP66 rain and dust protection
Metal housing, PC dome cover
IK8 vandalism protection
-Dimensions: 110 x 115.5 x 61.8 mm (4.33 x 4.53 x 2.43 in)
-Weight: 620 g (1.37 lb)
-Installation: Panel mounting
-Protection: PCB conformal coating is optional and available on request. If conformal coating is required, please contact Moxa.

Environmental conditions
-Operating temperature: -25 to 55°C (-13 to 131°F)
-Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
-relative humidity: 5 to 95% (non-condensing)
-protection class: IEC 60529, IP66
-vandal resistance: EN 62262, IK8
-altitude: 2000 m
Note: Please contact Moxa if you require products that are guaranteed to work at higher altitudes.

Standards and certifications
-EMI: CISPR 32, FCC Part 15B Class A
-EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-Free-fall: IEC 60068-2-31
-Railway fire protection: EN 45545-2
-Safety: UL 62368-1
-Shock: IEC 60068-2-27, IEC 61373, EN 50155
-Vibration: IEC 60068-2-64, IEC 61373, EN 50155
-Railway: EN 50155 (fulfils part of the EN 50155 specifications)

MTBF
Time: 1.050,590 hours
Standards: Telcordia SR332