VPORT P06HC-1V80M-CT - EN 50155, HD image, cubic IP camera with M12 connector, PoE, 8.0 mm lens, -40...

Introduction
The VPort P06HC-1V Series cubic IP cameras provide an HD (720P, 1280 x 720) video image, and feature 3 H.264 video streams, giving them the versatility and ruggedness to excel in many different installations and environments for IP video surveillance applications. In addition, the cameras comply with a portion of EN 50155 specifications, covering operating temperature, power input voltage, surge, ESD, and vibration, making them suitable for a variety of industrial applications. The cameras feature a -40 to 55°C operating temperature, a rugged M12 Ethernet port, PoE power inputs, and a selectable lens.

VPort P06HC-1V80M-CT
VPort P06HC-1V Series
EN 50155, HD image, cubic IP camera with M12 connector, PoE, 8.0 mm lens, -40 to 55°C operating temperature, conformal coating

Ethernet Interface
PoE Ports (10/100BaseT(X), M12 D-coded 4-pin female connector): 1

Ethernet Software Features
Protocols: TCP/IP, IPv4, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS

Security Functions
Password: User-level password protection
Filter: IP address
Encryption: HTTPS

Power Parameters
No. of Power Inputs: 1
Source of Input Power: PoE (IEEE 802.3af)
Input Current: 0.17 A @ 48 VDC

Camera Characteristics
Sensor: 1/2.7-in HD progressive scan CMOS
Lens: f=8.0 mm, F1.6, Diagonal 45°, Horizontal 40°, Vertical 22°
Minimum Illumination: Color: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
Synchronization: Internal
White Balance: ATW/AWB
Electronic Shutter: Auto (1/30 to 1/25000 sec)
S/N Ratio: Maximum 50 dB (AGC off; DNR on)
DNR (digital noise reduction): Built-in DNR
WDR (wide dynamic range): 110 dB
Flickerless Control: Automatic, 50 Hz, 60 Hz modes
Image Rotation: Flip, Mirror, and 180° rotation
Image Setting: Manual tuning with saturation, sharpness, and contrast
AGC (auto gain control): 2X, 4X, 8X, 16X, 32X, 64X
BLC (back light compensation): High/Medium/Low

Video Interface
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Output: via Ethernet
Video Streams: 3 independent H.264 or MJPEG video streams
Video Resolution and FPS (frames per second)
Video Viewing:
-DynaStreamâ„¢ support for changing the video frame rate automatically
-CBR Proâ„¢ for good image quality in limited bandwidth transmissions
-3 privacy mask areas provided
-Adjustable image size and quality
-Timestamp and text overlay
-OSD (On Screen Display) position adjustable
-Maximum of 5 simultaneous unicast connections, 50 multicast clients

Camera Software Development
Video Standards: ONVIF Profile S

Camera Alarm Software Features
Intelligent Video: Camera tampering detection
Video Motion Detection: 3 independently configurable areas
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Custom Alarms: HTTP event servers for setting customized alarm actions
FTP Messaging: Automatic transfer of stored images via FTP as event-triggered actions

Software Requirements
Memory Size: 1 GB
Operating System: Windows 7 or above
Browser: Internet Explorer 9.x or above
Multimedia: DirectX 9.0C or above

Physical Characteristics
Housing: Metal
Dimensions: 60 x 60 x 74.6 mm (2.36 x 2.36 x 2.94 in)
Weight: 300 g (0.66 lb)
Installation: Flush mounting
Protection: PCB conformal coating

Environmental Limits
Operating Temperature: -40 to 55°C (-40 to 131°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ingress Protection: IEC 60529, IP30 (provided screws are used to fill the camera housing screw holes)
Altitude: 2000 m

Standards and Certifications
EMI: CISPR 32, FCC Part 15B Class A
EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Signal: 2 kV
IEC 61000-4-5 Surge: Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Freefall: IEC 60068-2-31
Railway Fire Protection: EN 45545-2
Safety: UL 62368-1
Shock: IEC 60068-2-27, IEC 61373, EN 50155
Vibration: IEC 60068-2-64, IEC 61373, EN 50155
Railway: EN 50155 (complies with a portion of EN 50155 specifications)

MTBF
Time: 692,847 hrs
Standards: IEC 62380