AWK-3252A-US-T - 802.11abgnac access point, US band, operating temperature -40 to 75 °C

Moxa's extensive range of industrial-grade 3-in-1 wireless AP/bridge/client products combine a rugged housing with high-performance Wi-Fi connectivity to provide a secure and reliable wireless network connection that will not fail in environments with water, dust and vibration.

802.11a/b/g/n/ac access point, US band, -40 to 75°C operating temperature

WLAN interface
- WLAN standards
2.4 GHz: 802.11b/g/n with 256 QAM support
5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
- Frequency band for USA (20 MHz operating channels)
5.745 to 5.825 GHz (5 channels)
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.260 to 5.240 GHz (4 channels)
- Wireless security
WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2/WPA3-Personal
- Transmission rate
2.4 GHz:
802.11b: 1 to 11 Mbps
802.11g: 6 to 54 Mbps
802.11n: 6.5 to 400 Mbps
5 GHz:
802.11a: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
802.11ac: 6.5 to 867 Mbps
- Transmission performance for 802.11a (Dual Chain)
25±1.5 dBm @ 6 Mbps
23±1.5 dBm @ 54 Mbps
-Transmit power for 802.11n (5 GHz, Dual Chain)
25±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS7 20 MHz
24±1.5 dBm @ MCS0 40 MHz
22±1.5 dBm @ MCS7 40 MHz
- Transmission power for 802.11ac (Dual Chain)
25±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS8 20 MHz
24±1.5 dBm @ MCS0 40 MHz
21±1.5 dBm @ MCS9 40 MHz
23±1.5 dBm @ MCS0 80 MHz
20±1.5 dBm @ MCS9 80 MHz
- Transmission power for 802.11b (Dual Chain)
29±1.5 dBm @ 1 Mbps
29±1.5 dBm @ 11 Mbps
- Transmission power for 802.11g (Dual Chain)
29±1.5 dBm @ 6 Mbps
26±1.5 dBm @ 54 Mbps
- Transmission power for 802.11n (2.4 GHz, Dual Chain)
28±1.5 dBm @ MCS0 20 MHz
25±1.5 dBm @ MCS7 20 MHz
28±1.5 dBm @ MCS0 40 MHz
25±1.5 dBm @ MCS7 40 MHz
- Receive sensitivity for 802.11a (measured at 5.680 GHz)
Typ. -88 @ 6 Mbps
Typ. -72 @ 54 Mbps
- Reception sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
Type. -88 dBm @ MCS0 20 MHz
Typ. -68 dBm @ MCS7 20 MHz
Typ. -84 dBm @ MCS0 40 MHz
Type. -66 dBm @ MCS7 40 MHz
- Reception sensitivity for 802.11ac
Type. -88 dBm @ MCS0 20 MHz
Type. -65 dBm @ MCS8 20 MHz
Type. -85 dBm @ MCS0 40 MHz
Type. -60 dBm @ MCS9 40 MHz
Type. -81 dBm @ MCS0 80 MHz
Type. -55 dBm @ MCS9 80 MHz
- Reception sensitivity for 802.11b (measured at 2.437 GHz)
Type. -96 dBm @ 1 Mbps
Type. -88 dBm @ 11 Mbps
- Reception sensitivity for 802.11g (measured at 2.437 GHz)
Type. -90 dBm @ 6 Mbps
Type. -74 dBm @ 54 Mbps
- Receiver sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
Type. -90 dBm @ MCS0 20 MHz
Typ. -70 dBm @ MCS7 20 MHz
Typ. -87 dBm @ MCS0 40 MHz
Type. -69 dBm @ MCS7 40 MHz
- WLAN operating mode
Access Point
Client
Client-Router
Master
Slave
Sniffer
- Antenna
External, 2/2 dBi
Omnidirectional
- Antenna connections 2 RP-SMA sockets

Ethernet interface
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for PoE
IEEE 802.3at for PoE
IEEE 802.3az for energy-efficient Ethernet
IEEE 802.1Q for VLAN tagging
IEEE 802.1X for authentication
- 10/100/1000BaseT(X) connections (RJ45 connection) 1
- PoE connections (10/100/1000BaseT(X), RJ45 connection)1

Ethernet software features
- Management
DHCP server
DHCP client
DNS
HTTP
IPv4
LLDP
SMTP
SNMPv1/v2c/v3
Syslog
TCP/IP
Telnet
UDP
VLAN
MXconfig
- Routing Routing
Port forwarding
Static route
NAT
- Security
HTTPS/SSL
RADIUS
SSH
Certificate management
- Time management Time managementSNTP client

Firewall
- Filter
ICMP
MAC address
IP protocol
Port-based
Wi-Fi ACL
Client isolation

Serial interface
- Console port
RS-232
8-pin RJ45

USB interface
- USB type A memory port

LED interface
- LED indicators PWR1, PWR2, PoE, SYS, 2.4G, 5G, LAN1, LAN2

Input/output interface
- Digital inputs
2
Max. Input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0
- Alarm contact channels Relay output with a current carrying capacity of 1 A @ 24 VDC
- Reset button

Physical properties
- Metal housing
- Protection class IP30
- Dimensions 45 x 130 x 100 mm (1.77 x 5.12 x 3.94 in)
- Weight 700 g (1.5 lb)
- Installation
DIN rail mounting
Wall mounting (with optional kit)

Performance parameters
- Input current 12-48 VDC, 2.2-0.5 A
- Input voltage
12 to 48 VDC
Redundant dual inputs
48 VDC Power-over-Ethernet
- Power connection 1 detachable 10-contact terminal block(s)
- Power consumption 28.4 W (max.))

Environmental conditions
- Operating temperature -40 to 75°C (-40 to 167°F)
- Storage temperature (including packaging) -40 to 85°C (-40 to 185°F)
- Ambient relative humidity5 to 95% (non-condensing)

Standards and certifications
- EMC
EN 61000-6-2/-6-4
EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 30 A/m
- Safety
IEC 60950-1
IEC 62368-1
UL 62368-1
- Hazardous areas
ATEX
Class I Division 2
IECEx
- Road vehicles E-mark E1
- Vibration IEC 60068-2-6
- Radio EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC
- Industrial cyber security
IEC 62443-4-1
IEC 62443-4-2

MTBF
- Time 653.801 hours
- Standards Telcordia SR332