AWK-4131A-JP-T - 802.11abgn access point, JP band, IP68, -40 to 75C operating temperature

802.11a/b/g/n access point, JP band, IP68, -40 to 75°C operating temperature

WLAN interface
- WLAN standards: 802.11a/b/g/n; 802.11i Wireless security
- Modulation type: DSSS; OFDM; MIMO-OFDM
- Frequency band for JP (20 MHz operating channels):
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.240 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
- Wireless security:
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal
- Transmission rate:
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
- Transmission power for 802.11a:
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
- Transmission power for 802.11n (5 GHz):
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
- Transmission power for 802.11b:
26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps
- Transmission power for 802.11g:
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
19±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
- Transmission power for 802.11n (2.4 GHz):
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
- Receive sensitivity for 802.11a (measured at 5.680 GHz):
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Type. -85 @ 18 Mbps
Type. -81 @ 24 Mbps
Type. -78 @ 36 Mbps
Type. -74 @ 48 Mbps
Type. -72 @ 54 Mbps
- Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.
- Receiver sensitivity for 802.11n (5 GHz; measured at 5.680 GHz):
Type. -69 dBm @ MCS7 20 MHz
Type. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40 MHz
Type. -68 dBm @ MCS15 40 MHz
Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.
- Receiver sensitivity for 802.11b (measured at 2.437 GHz):
Type. -93 dBm @ 1 Mbps
Type. -93 dBm @ 2 Mbps
Type. -93 dBm @ 5.5 Mbps
Type. -88 dBm @ 11 Mbps
- Reception sensitivity for 802.11g (measured at 2.437 GHz):
Type. -88 dBm @ 6 Mbps
Type. -86 dBm @ 9 Mbps
Type. -85 dBm @ 12 Mbps
Type. -85 dBm @ 18 Mbps
Type. -85 dBm @ 24 Mbps
Type. -82 dBm @ 36 Mbps
Type. -78 dBm @ 48 Mbps
Type. -74 dBm @ 54 Mbps
- Reception sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz):
Type. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40 MHz
Type. -67 dBm @ MCS15 40 MHz
WLAN operating mode: Access point, client, client router, master, slave, sniffer
Antenna: External, 3/6 dBi, omnidirectional
WLAN antenna connection: 2 N-type sockets

Ethernet interface
- Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3at for PoE
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1Q for VLAN tagging
- PoE ports (10/100/1000BaseT(X), RJ45 connection): 1

Ethernet software functions
- Management: DHCP server/client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig
- Routing: Static route, NAT, port forwarding
- Redundancy protocols: RSTP, STP
- Security: HTTPS/SSL, RADIUS, SSH
- Time management: SNTP client

Firewall
- Filters: ICMP, MAC address, IP protocol, port-based

Serial interface
- Console connection: RS-232, 8-pin RJ45

LED interface
- LED indicators: PWR, FAULT, STATE, WLAN, LAN

Input/output interface
- Alarm contact channels: Relay output with a current carrying capacity of 1 A @ 24 VDC
- Buttons: Reset button
- Digital inputs:
- +13 to +30 V for state 1
- +3 to -30 V for state 0
- Max. input current: 8 mA Input current: 8 mA

Physical properties
- Housing: Metal
- IP protection class: IP68
- Dimensions: 224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 inches)
- Weight: 1.400 g (3.09 lb)
- Mounting: Wall mounting (standard), DIN rail mounting (optional), pole mounting (optional)

Performance parameters
- Input current: 0.64 A @ 12 VDC, 0.16 A @ 48 VDC
- Input voltage: 12 to 48 VDC, redundant dual inputs, 48 VDC Power-over-Ethernet
- Power connection: M12 A-coded 5-pin connector
- Power consumption: 7.68 W (max.)
- Reverse polarity protection: Supports

Environmental conditions
- Operating temperature: -40 to 75°C (-40 to 167°F)
- Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
- Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
- EMC: EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Radio: EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC
- Safety: EN 60950-1, UL 60950-1
- Vibration: IEC 60068-2-6

MTBF
- Time: 440,764 hours
- Standards: Telcordia SR332