MGATE 5114-T - 1-port Modbus IEC101 to IEC104 gateway, -40 to 75C operating temperature

Introduction
The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104 network communication. By integrating common power supply protocols, the MGate 5114 provides the flexibility to fulfil the various conditions encountered by field devices that use different communication protocols to connect to a SCADA system for power supply. To integrate Modbus or IEC 60870-5-101 devices into an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect and exchange data with IEC 60870-5-104 systems.

Easy configuration via the web console
The MGate 5114 series comes with an illustrated Quick Setup Guide to make configuration easy. With Quick Setup, you can easily access the protocol conversion modes and complete the configuration in a few steps.

Modbus RTU/ASCII/TCP Protocol Traffic Monitor
The MGate 5114 series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation phase. It is worth noting that the traffic logs can be viewed using the popular troubleshooting tool, Wireshark. This feature makes it easy to analyse traffic to determine the cause of a problem.

Maintenance functions
MGate 5114 gateways support a system log function that records events in the MGate; users can easily check the log data remotely via the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system if a device becomes disconnected or unresponsive. In this case, the PSCADA system receives the status of each terminal device and then issues alarms to notify operators.

MGate 5114-T
MGate 5114 series
1-Port Modbus/IEC101 to IEC104 Gateway, -40 to 75°C operating temperature

Ethernet interface
10/100BaseT(X) ports (RJ45 connector): 2, Auto MDI/MDI-X connector
Magnetic isolation protection: 1.5 kV (built-in)

Ethernet software features
-Industrial protocols:
Modbus TCP Client (Master)
Modbus TCP Server (Slave)
IEC 60870-5-104 Client
IEC 60870-5-104 Server

-Configuration options:
Web Console (HTTP/HTTPS)
Device Search Utility (DSU)
Telnet Console

-Management:
ARP
DHCP Client
DNS
HTTP
HTTPS
SMTP
SNMP Trap
SNMPv1/v2c/v3
TCP/IP
Telnet
SSH
UDP
NTP Client

-MIB: RFC1213, RFC1317
-Time management: NTP Client

Security functions
-Authentication: Local database
-Encryption:
HTTPS
AES-128
AES-256
SHA-256
-Security protocols:
SNMPv3
SNMPv2c Trap
HTTPS (TLS 1.3)

Serial interface
-Console port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
-Number of ports: 1
-Connector: DB9 connector
-Serial standards: RS-232/422/485
-Baud rate: 50 bps to 921.6 kbps
-Data bits: 7, 8
-Parity:
Even
Mark
None
Odd
Space
-Stop Bits: 1, 2
-Flow Control: RTS Toggle (RS-232 only), RTS/CTS
-RS-485 Data Direction Control: Automatic Data Direction Control (ADDC)
-Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohm
-Terminator for RS-485: 120 ohm
-Isolation:2 kV (built-in)

Serial signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Serial software functions
-Industrial protocols:
Modbus RTU/ASCII Master
Modbus RTU/ASCII Slave
IEC 60870-5-101 Master (balanced/unbalanced)
IEC 60870-5-101 Slave (balanced/unbalanced)
-Configuration options: Serial console

Modbus RTU/ASCII
Mode: Master, Slave
Supported functions: 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. Number of commands: 128

Modbus TCP
-Mode: Client (master), server (slave)
-Supported functions: 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. Max. number of client connections2: 32
-Max. Max. number of server connections: 32
-Max. number of commands: 128 IEC Number of commands: 128

IEC 60870-5-104
-Mode: Client, Server
-Max. Number of client connections: 32
-Max. Number of server connections: 32
-Max. Number of information objects: 2000 points

IEC 60870-5-101
-Mode:
Master (balanced/unbalanced)
Slave (balanced/unbalanced)
-Max. number of master connections: 1 Number of master connections: 1
-Max. Number of slave connections: 1 (balanced), 31 (unbalanced)
-Max. number of information objects: 2000 points Number of information objects: 2000 points

Memory
microSD slot: Up to 32 GB (SD 2.0 compatible)

Performance parameters
Input voltage: 12 to 48 VDC
Input current: 455 mA @ 12 VDC
Power connection: Screwable Euroblock terminal

Relay
Current carrying capacity of the contacts: Resistive load: 2 A @ 30 VDC

Physical properties
Housing: Metal
Protection class: IP30
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Weight: 507 g (1.12 lb)

Environmental conditions
Operating temperature: -40 to 75°C (-40 to 167°F)
Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
-EMC: EN 55032/35
-EMI: CISPR 32, FCC Part 15B Class B
-EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF

-safety: EN 62368-1, UL 508
-Explosive atmospheres:
ATEX
Class I Division 2
IECEx
-Free fall: IEC 60068-2-32
-Shock: IEC 60068-2-27
-Vibration: IEC 60068-2-6, IEC 60068-2-64

MTBF
Time: 1.140,815 hours
Standards: Telcordia SR332