EDS-G4008-LV - Managed Full Gigabit Ethernet switch with 8 10/100 1000BaseT(X) ports

Deliverytime: 19 - 21 working days (Mo-Fr) *
1.603,75 EUR
Key points at a glance:
Product Description

Moxa's Layer 2 managed switches feature industrial-grade reliability, network redundancy, and security features based on the IEC 62443 standard. We offer toughened, industry-specific products with multiple industry certifications, such as parts of the EN 50155 standard for rail applications, IEC 61850-3 for power automation systems, and NEMA TS2 for intelligent transportation systems.

Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, dual power supply 12/24/48 VDC, -10 to 60°C operating temperature

Ethernet Interface
- 10/100/1000BaseT(X) Ports (RJ45 connector)
8
Auto MDI/MDI-X connection
Auto negotiation speed
Full/Half duplex mode
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3x for flow control
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1X for authentication

Ethernet Software Features
- Industrial Protocols
EtherNet/IP
Modbus TCP
PROFINET IO Device
- Management
IPv4/IPv6
Flow control
Back Pressure Flow Control
DHCP Server/Client
ARP
RARP
LLDP
Port Mirroring (SPAN, RSPAN)
Linkup Delay
SMTP
SNMP Trap
SNMP Inform
SNMPv1/v2c/v3
RMON
TFTP
SFTP
HTTP
HTTPS
Telnet
Syslog
Private MIB
Fibre check
- Filter
GMRP
GVRP
GARP
802.1Q VLAN
IGMP Snooping v1/v2/v3
IGMP Querier
- Redundancy Protocols
STP
RSTP
Turbo Ring v2
Turbo Chain
Ring Coupling
Dual-Homing
Link Aggregation
MRP
MSTP
- Security
Broadcast storm protection
Rate Limit
Trust access control
Static Port Lock
MAC Sticky
HTTPS/SSL
SSH
RADIUS
TACACS+
Access control list
Login and Password Policy
DHCP Snooping
- Time Management
SNTP
NTP Server/Client
NTP Authentication
IEEE 1588v2 PTP (hardware-based)
Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017
- Protocols
IPv4/IPv6
TCP/IP
UDP
ICMP
ARP
RARP
TFTP
DNS
NTP Client
DHCP Server
DHCP Client
802.1X
QoS
HTTPS
HTTP
Telnet
SMTP
SNMPv1/v2c/v3
RMON
Syslog
- MIB
P-BRIDGE MIB
Q-BRIDGE MIB
IEEE8021-SPANNING-TREE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
SNMPv2-MIB
RMON MIB Groups 1, 2, 3, 9

Switch Properties
- MAC Table Size 16 K
- Jumbo Frame Size 9.216 KB
- Max. No. of VLANs 256
- VLAN ID Range VID 1 to 4094
- IGMP Groups 512
- Priority Queues 4
- Packet Buffer Size 1 MB

LED Interface
- LED Indicators PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial Interface
- Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB Interface
- USB Connector USB Type A (Reserved)

Input/Output Interface
- Alarm Contact Channels 1, Relay output with current carrying capacity of 1 A @ 24 VDC
- Digital Input Channels 1
- Digital Inputs
+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
- Buttons Reset button

DIPSwitch Configuration
- DIP Switches Turbo Ring, Master, Coupler, Reserve

Power Parameters
- Connection 2 removable 4-contact terminal block(s)
- Pre-installed Power Module PWR-100-LV
- Note
The EDS-G4008 Series supports modular power supplies. The model names and power parameters are determined by the installed power Module.
For example:
EDS-G4008-T + PWR-100-LV = EDS-G4008-LV-T
EDS-G4008-T + PWR-105-HV-I = EDS-G4008-HV-T
If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4008-LV-T with the PWR-105-HV-I, refer to the specifications of the EDS-G4008-HV-T.
- Input Voltage
12/24/48 VDC
Redundant dual inputs
- Operating Voltage 9.6 to 60 VDC
- Input Current 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A
- Overload Current Protection Supported
- Reverse Polarity Protection Supported
- Power Consumption (Max.) 8.84 W

Physical Characteristics
- IP Rating IP40
- Dimensions 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in)
- Weight 859.5 g (1.89 lb)
- Installation
DIN-rail mounting
Wall mounting (with optional kit)
- Housing Metal

Environmental Limits
- Operating Temperature -10 to 60°C (14 to 140°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications
- Industrial Cybersecurity
IEC 62443-4-1
IEC 62443-4-2
- Safety
UL 61010-2-201
EN 62368-1 (LVD)
- EMC
EN 55032/35
EN 61000-6-2/-6-4
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Maritime
DNV
ABS
NK
LR
- Vibration IEC 60068-2-6
- Shock IEC 60068-2-27
- Freefall IEC 60068-2-32
- Railway EN 50121-4
- Traffic Control NEMA TS2
- Power Substation
IEC 61850-3
IEEE 1613 Class 1
- Hazardous Locations
Class I Division 2
ATEX
IECEx

MTBF
- Time 1,098,085 hrs
- Standards Telcordia SR332

This website uses cookies to ensure you get the best user experience. Privacy Policy