AWK-3252A-UN - 802.11abgnac access point, UN band, -25 to 60C operating temperature

Moxa’s extensive collection of industrial-grade wireless 3-in-1 AP/bridge/client products combine a rugged casing with high-performance Wi-Fi connectivity to deliver a secure and reliable wireless network connection that will not fail, even in environments with water, dust, and vibrations.

802.11a/b/g/n/ac access point, UN band, -25 to 60°C operating temperature

WLAN Interface
- WLAN Standards
2.4 GHz: 802.11b/g/n with 256 QAM support
5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
- Frequency Band for UN (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.745 to 5.825 GHz (5 channels)
Available channels change depending on the selected country or region code.
5.500 to 5.700 GHz (11 channels)
5.260 to 5.320 GHz (4 channels)
- Wireless Security
WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2/WPA3-Personal
- Transmission Rate
2.4 GHz:
802.11b: 1 to 11 Mbps
802.11g: 6 to 54 Mbps
802.11n: 6.5 to 400 Mbps
5 GHz:
802.11a: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
802.11ac: 6.5 to 867 Mbps
- Transmitter Power for 802.11a (Dual Chain)
25±1.5 dBm @ 6 Mbps
23±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (5 GHz, Dual Chain)
25±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS7 20 MHz
24±1.5 dBm @ MCS0 40 MHz
22±1.5 dBm @ MCS7 40 MHz
- Transmitter Power for 802.11ac (Dual Chain)
25±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS8 20 MHz
24±1.5 dBm @ MCS0 40 MHz
21±1.5 dBm @ MCS9 40 MHz
23±1.5 dBm @ MCS0 80 MHz
20±1.5 dBm @ MCS9 80 MHz
- Transmitter Power for 802.11b (Dual Chain)
29±1.5 dBm @ 1 Mbps
29±1.5 dBm @ 11 Mbps
Transmitter Power for 802.11g (Dual Chain)
29±1.5 dBm @ 6 Mbps
26±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (2.4 GHz, Dual Chain)
28±1.5 dBm @ MCS0 20 MHz
25±1.5 dBm @ MCS7 20 MHz
28±1.5 dBm @ MCS0 40 MHz
25±1.5 dBm @ MCS7 40 MHz
- Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
Typ. -88 @ 6 Mbps
Typ. -72 @ 54 Mbps
- Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
Typ. -88 dBm @ MCS0 20 MHz
Typ. -68 dBm @ MCS7 20 MHz
Typ. -84 dBm @ MCS0 40 MHz
Typ. -66 dBm @ MCS7 40 MHz
- Receiver Sensitivity for 802.11ac
Typ. -88 dBm @ MCS0 20 MHz
Typ. -65 dBm @ MCS8 20 MHz
Typ. -85 dBm @ MCS0 40 MHz
Typ. -60 dBm @ MCS9 40 MHz
Typ. -81 dBm @ MCS0 80 MHz
Typ. -55 dBm @ MCS9 80 MHz
- Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
Typ. -96 dBm @ 1 Mbps
Typ. -88 dBm @ 11 Mbps
- Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
Typ. -90 dBm @ 6 Mbps
Typ. -74 dBm @ 54 Mbps
- Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
Typ. -90 dBm @ MCS0 20 MHz
Typ. -70 dBm @ MCS7 20 MHz
Typ. -87 dBm @ MCS0 40 MHz
Typ. -69 dBm @ MCS7 40 MHz
- WLAN Operation Mode 
Access point
Client
Client-Router
Master
Slave
Sniffer
- Antenna
External, 2/2 dBi
Omni-directional
- Antenna Connectors 2 RP-SMA female

Ethernet Interface
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for PoE
IEEE 802.3at for PoE
IEEE 802.3az for Energy-Efficient Ethernet
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
- 10/100/1000BaseT(X) Ports (RJ45 connector) 1
- PoE Ports (10/100/1000BaseT(X), RJ45 connector) 1

Ethernet Software Features
- Management
DHCP Server
DHCP Client
DNS
HTTP
IPv4
LLDP
SMTP
SNMPv1/v2c/v3
Syslog
TCP/IP
Telnet
UDP
VLAN
MXconfig
- Routing
Port forwarding
Static Route
NAT
- Security
HTTPS/SSL
RADIUS
SSH
Certificate Management
- Time Management SNTP Client

Firewall
- Filter
ICMP
MAC address
IP protocol
Port-based
Wi-Fi ACL
Client Isolation

Serial Interface
- Console Port 
RS-232
8-pin RJ45

USB Interface
- Storage Port USB Type A

LED Interface
- LED Indicators PWR1, PWR2, PoE, SYS, 2.4G, 5G, LAN1, LAN2

Input/Output Interface
- Digital Inputs
2
Max. input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0
- Alarm Contact Channels Relay output with current carrying capacity of 1 A @ 24 VDC
- Buttons Reset button

Physical Characteristics
- Housing Metal
- IP Rating IP30
- Dimensions 45 x 130 x 100 mm (1.77 x 5.12 x 3.94 in)
- Weight 700 g (1.5 lb)
- Installation
DIN-rail mounting
Wall mounting (with optional kit)

Power Parameters
- Input Current 12-48 VDC, 2.2-0.5 A
- Input Voltage
12 to 48 VDC
Redundant dual inputs
48 VDC Power-over-Ethernet
- Power Connector 1 removable 10-contact terminal block(s)
- Power Consumption 28.4 W (max.)

Environmental Limits
- Operating Temperature -25 to 60°C (-13 to 140°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications
- EMC
EN 61000-6-2/-6-4
EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 30 A/m
- Safety
IEC 60950-1
IEC 62368-1
UL 62368-1
- Hazardous Locations
ATEX
Class I Division 2
IECEx
- Road Vehicles E mark E1
- Vibration IEC 60068-2-6
- Radio EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC
- Industrial Cybersecurity
IEC 62443-4-1
IEC 62443-4-2

MTBF
- Time 653,801 hrs
- Standards Telcordia SR332