MGATE 4101I-MB-PBS-T - 1-port Modbus-to-PROFIBUS slave gateway with 2 kV insulation, 12 to 48 VDC

With our fieldbus gateway solutions, you can connect industrial serial devices in a system quickly, easily and reliably. Thanks to their intelligent functionality, you can effortlessly connect your Modbus and PROFIBUS devices.

1-Port Modbus-to-PROFIBUS slave gateway with 2 kV isolation, 12 to 48 VDC, -40 to 75°C operating temperature

Serial Interface
- Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
- No. of Ports 1
- Connector DB9 male
- Serial Standards RS-232/422/485
- Baudrate 50 bps to 921.6 kbps
- Data Bits 7, 8
- Parity None, Even, Odd, Space, Mark
- Stop Bits 1, 2
- Flow Control
DTR/DSR
RTS/CTS
- RS-485 Data Direction Control Automatic Data Direction Control (ADDC)
- Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485 120 ohms
- Isolation 2 kV (I models)

Serial Signals
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features
- Configuration Options MGate Manager
- Industrial Protocols
Modbus RTU/ASCII Master
Modbus RTU/ASCII Slave
PROFIBUS DP-V0 Slave

Modbus RTU/ASCII
- Mode Master, Slave
- Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. No. of Commands 100
- Input Data Size 7744 bytes
- Output Data Size 7744 bytes

PROFIBUS Interface
- Industrial Protocols PROFIBUS DP
- No. of Ports 1
- Connector DB9 female
- Baudrate 9600 bps to 12 Mbps
- Isolation 2 kV (built-in)
- Signals PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V

PROFIBUS
- Rotary Switch PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration)
- Mode DP-V0 Slave
- Max. No. of Master Connections 1
- Max. No. of PROFIBUS I/O Modules 24 per page
- Max. No. of PROFIBUS Pages 32
- Input Data Size 7744 bytes
- Output Data Size 7744 bytes

Power Parameters
- Input Voltage 12 to 48 VDC
- Input Current 275 mA @ 12 VDC
- Power Connector Screw-fastened Euroblock terminal

Relays
- Contact Current Rating Resistive load: 1 A @ 24 VDC

Physical Characteristics
- Housing Metal
- Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
- Weight 500 g (1.10 lb)
- IP Rating IP30
Note: It is recommended to attach the M3x3mm Nylok screws at the rear side

Environmental Limits
- Operating Temperature -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications
- EMC EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
- Safety
IEC 60950-1
UL 60950-1
IEC 62368-1
UL 62368-1
- Hazardous Locations
ATEX
Class I Division 2
IECEx
- Freefall Freefall IEC 60068-2-32
- Shock IEC 60068-2-27
- Vibration
IEC 60068-2-6
IEC 60068-2-64

MTBF
- Time
MGate 4101-MB-PBS models: 1,537,948 hrs
MGate 4101I-MB-PBS models: 1,315,666 hrs
- Standards Telcordia SR332