85M-1602-T - Module for the ioPAC 85008600 series, 16 DIs, 24 VDC, sink source

Module for the ioPAC 8500/8600 series, 16 DIs, 24 VDC, sink/source, -40 to 75°C Operating temperature

Input/output interface
Digital input channels
- 16
Isolation
- 3k VDC or 2k Vrms

Digital inputs
Voltage
- 24 VDC
Connection
- Spring euroblock terminal
Counter frequency
- 5 kHz
Dry contact
- On: Short circuit to GND
- Off: open
I/O mode
- DI, event counter or frequency
Points per COM
- 8 channels
Sensor type
- Dry contact
- Wet contact (NPN or PNP)
Wet contact (DI to COM)
- On: 10 to 30 VDC
- Off: 0 to 3 VDC

Digital outputs
Pulse output frequency
- 5 kHz

Power parameters
Power consumption
- 50.0 mA @ 24 VDC

Physical properties
Dimensions
- 25 x 128.2 x 85.5 mm (0.98 x 5.05 x 3.37 in)
Weight
- less than 80 g
Wiring
- I/O cable, 14 to 28 AWG

Environmental conditions
Operating temperature
- -40 to 75°C (-40 to 167°F)
Storage temperature (including packaging)
- -40 to 85°C (-40 to 185°F)
Relative humidity
- 5 to 95% (non-condensing)
Altitude
- 2000 m
- Note: Please contact Moxa if you require products that are guaranteed to function properly at higher altitudes.

Standards and certifications
EMC
- EN 55032/24
- EN 61000-6-2/-6-4
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
- IEC 61000-4-3 RS: 5100 MHz to 6000 MHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
Railway
- EN 50121-4
- EN 50155 (fulfils part of the EN 50155 specifications)
Safety
- UL 508
Shock
- IEC 60068-2-27
Vibration
- IEC 60068-2-6

MTBF
Time
- 1,132.561 hours
Standards
- Telcordia SR332