ICF-1150I-M-SC-T-IEX - Industrial RS-232422485 to multi-mode fibre converter

ICF-1150I-M-SC-T-IEX
ICF-1150 series
Industrial RS-232/422/485 to multimode fibre optic converter, SC connector, 2 kV isolation, IECEx, -40 to 85 °C operating temperature

Serial interface
-Number of ports:2
-Serial standards: RS-232, RS-422, RS-485
-Baud rate:50 bps to 921.6 kbps (supports non-standard baud rates)
-Data direction control:ADDC (automatic data direction control) for RS-485
-Connector:5-pin terminal block, multimode SC connector
-Isolation: 2 kV (I models)
-Pull high/low resistance for RS-485:150 kilo-ohms, 10 kilo-ohms, 4.7 kilo-ohms, 3.3 kilo-ohms, 1 kilo-ohm, 909 ohms, 822 ohms, 770 ohms, 500 ohms, 485 ohms
-RS-485 data direction control:ADDC (automatic data direction control)
-Terminator for RS-485:N/A, 120 Ohm, 120 Kilo-Ohm

Serial signals
RS-232: TxD, RxD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w:Data+, Data-, GND

Power parameters
Input current:300 mA at 12 to 48 VDC
Input voltage: 12 to 48 VDC
Number of current inputs: 1
Overload current protection: Supports
Connector: Terminal block
Power consumption: 300 mA at 12 to 48 VDC

Physical properties
Housing: Metal
IP rating: IP30
Dimensions:30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 inches)
Weight: 330 g (0.73 pounds)
Installation: DIN rail mounting

Environmental limits
Operating temperature:-40 to 85 °C (-40 to 185 °F)
Storage temperature (included): -40 to 85 °C (-40 to 185 °F)
Ambient relative humidity: 5 to 95 % (non-condensing)

Standards and certifications
-EMC: EN 55032/35
-EMI:CISPR 32, FCC Part 15B Class A
-EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Overvoltage: Power: 4 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; signal: 3 V/m
IEC 61000-4-8 PFMF

-Environmental tests:
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3

-Safety: UL 61010-2-201
-Vibration:IEC 60068-2-6
-Hazardous locations:
UL/cUL Class I Division 2 Groups A/B/C/D
ATEX Zone 2
IECEx

MTBF
Time:792.085 hrs
Standards: Telcordia (Bellcore), GB