EOM-104-FO EVALUATION KIT - Evaluation kit with one EOM-104-FO switching module

Our Ethernet embedded modules are designed for device manufacturers who want to improve the performance and reliability of their solutions and make them suitable for use in applications with harsh conditions.

Evaluation kit with an EOM-104-FO switch module and an evaluation board with 2 10/100BaseT(X) ports, 2 100BaseFX multimode ports with SC connector for testing and application development

Ethernet interface
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1p for Class of Service
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
- 10/100BaseT(X) Port 2
- 100BaseFX Port 2
- Connector 1 connector with 2 x 20 pins, 2 connectors with 1 x 9 pins and 1 connector with 2 x 2 pins
- GPIO 4 x programmable I/O pins

Ethernet software features
- ProtocolsBOOTP, DHCP Client, HTTP, RARP, RMON, SMTP, SNMPv1/v2c/v3, Syslog, Telnet, TFTP
- MIB Bridge MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, RMON MIB groups 1, 2, 3, 9, RSTP MIB

Switch Properties
- MAC Table Size1 K
- Packet Buffer Size 512 kbits

Serial Interface
- Console Port RS-232 (TxD, RxD, DTR, DSR)

Power Parameter
- Input Current 1.1 A @ 3.3 VDC

Physical Characteristics
- Dimensions 54 x 60 x 8.25 mm (2.13 x 2.36 x 0.32 in)
- Weight 21 g (0.046 lb)

Environmental conditions
- Operating temperature -40 to 75°C (-40 to 167°F)
- Storage temperature (including packaging)-40 to 85°C (-40 to 185°F)
- Ambient relative humidity 5 to 95% (non-condensing)

Standards and certifications
- EMC EN 55032/24
- EMI CISPR 32, FCC Part 15B Class A