BPI-P2 PRO (WITH POE MODULE WELDED) - Banana Pi -P2 PRO (with POE module welded)

Banana Pi BPI-P2 pro（Armsom Pro） is a development board based on RK3308B-S chip. With a high-performance 4-core ARM Cortex-A35 processor, 512M RAM(16bit DDR2/DDR3/DDR3L/LPDDR2). and 8G eMMC onboard ,support PoE function.The chip has a wealth of interfaces, such as I2S,PCM,TDM, I2C,UART,SPDIF,HDMI ARC, etc., to meet the application of different products. RK3308 has a rich voice interface, its own eight ADC interface, multi-channel I2S and multi-channel PDM interface. This not only provides customers with a wealth of interface choices, but also can reduce the hardware design difficulty and hardware design cost of products.
Banana Pi BPI-P2 Pro has 512MB DDR3 memory size, operating system and storage can use SD card or emmc. BPI-P2 Pro is available as an onboard storage version with 1Gb/2Gb/4Gb/8Gb NAND flash

Application direction
- Maker DIY
- IoT Smart Internet of Things
- Intelligent speech recognition,
- Man-machine interface,
- Industrial control,
- Intelligent robot.

Key Features:
- CPU: 64bits Quad-core Arm Cortex-A35 Rockchip RK3308
- 512 DDR3 SDRAM
- 8G eMMC flash onboard
- WiFi (AP6256) & BT onboard
- 40 PIN GPIO,It includes UART, SPI, I2C, IO etc
- 100M LAN
- IEEE 802.3af PoE standard PoE module support

Banana Pi BPI-P2 pro
- SOC RockChip RK3308B-S
- CPU Quad-core ARM Cortex-A35
- GPU none
- ROM 512MB
- RAM 8GB eMMC
- TF Card TF card (Max 64GB)
- Network 100M LAN
- PoE power PoE function support，Output Voltage 5V, Output Power 10W
- WiFi AP6256
- Audio Output With built-in audio CODEC, including ADC×8 and DAC×2
- Power Source TYPE C 5V/2A or PoE power
- USB 1xUSB 2.0 1xType-C
- Others Fan、RTC、LED、debug
- Button Power Button、Reset Button、 Recovery Button、Root Button
- Low-level peripherals 40 Pin + 12 Pin
- uart GPIO(1x3) pin UART, ground
- LED Power led & Status led
- Product size 65mm X 52.5mm
- Weight 30g