ICF-1171I-M-ST-T - Industrial CAN to fibre optic converter for distance extension

Industrial CAN to fibre optic converter for distance extension, ST multi-mode, -40 to 75°C

Serial interface
Fibre optic
- 100Base-Fx ports (single-mode/multi-mode ST connector)
Fibre optic
- Note: The "typical distance" of a specific fibre optic transceiver can be calculated using the link budget (dB) > dispersion penalty (dB) + total link loss (dB).

CAN interface
Isolation
- 2 kV (built-in)
Number of ports
- 1
Signals
- CAN_L, CAN_H, CAN Signal GND
Terminating resistor
- N/A, 120 Ohm (via DIP)
Protocols
- CAN 2.0A, CAN 2.0B, CAN FD, compatible with ISO 11898 standard (DIP switch for selecting the CAN 2.0/CAN FD setting)

Fibre optic interface
Number of ports
- 1
Connection
- Multi-mode ST connection
Fibre optic
- Single-mode, typical distance 40 km
- Multi-mode, typical distance 2 km

Performance parameters
Input current
- 188.5 mA (max.)
Input voltage
- 12 to 48 VDC
Number of current inputs
- 2
Power connection
- Terminal block

Relay
Contact current
- Resistance load: 1 A @ 30 VDC
Pinouts
- NC, COM, NO

Physical properties
Housing
- Metal
Protection class
- IP30
Dimensions
- 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight
- 294 g (0.65 lb)
Installation
- DIN rail mounting - wall mounting (with optional kit)

Environmental conditions
Operating temperature
- -40 to 75°C (-40 to 167°F)
Storage temperature (including packaging)
- -40 to 85°C (-40 to 85°C) -40 to 85°C (-40 to 185°F)
Relative humidity
- 5 to 95% (non-condensing)

Standards and certifications
EMC
- EN 55032/35
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
- IEC 61000-4-5 Surge: Power: 2 kV, Signal: 2 kV
- IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
- IEC 61000-4-8 PFMF
International approvals
- KC
Safety
- UL 62368-1, EN 62368-1
Vibration
- IEC 60068-2-6

MTBF
- Time 2.412,885 hrs
- Standards Telcordia (Bellcore), GB