TCC-80-DB9 - Port-fed RS-232 to RS-422485 converter with 15 kV

Moxa's serial-to-serial media converters can convert between RS-232, RS-422 and RS-485, eliminating compatibility issues that often occur when communicating between different serial interfaces.

Port-powered RS-232 to RS-422/485 converter with 15 kV serial ESD protection and DB9 connector on the RS-422/485 side

Serial interface
- Connector -DB9 connector
- Numberofconnectors-2
- Serial standards
-RS-232
-RS-422
-RS-485
- RS-485 data direction control ADDC(automatic data direction control)
- Terminating resistor for RS-485-N/A, 120 Ohm, 120 Kilo-Ohm
- Baud rate 300 bps to 115.2 kbps

Serial signals
- RS-422-Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w -Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w-Data+, Data-, GND
- RS-232-TxD, RxD, GND

Performance parameters
- Input current 30 mA @ 5 to 12 VDC
- Input voltage 5 to 12 VDC
- Qty. Mains Inputs-1
- Overload Protection Supported
- Input Power Source Mains Input Socket

Physical Characteristics
- Housing Top Cover Plastic, Base Plate Metal
- Degree of Protection IP30
- Dimensions 42x 91 x 23.6 mm (1.65 x 3.58 x 0.93 in)
- Weight 50 g (0.11 lb)
- Installation Desktop

Environmental conditions
- Operating temperature 0 to 60°C (32 to 140°F)
- Storage temperature (including packaging) -20 to 75°C (-4 to 167°F)
- Relative humidity 5 to 95% (non-condensing)

Standards and certifications
EMC-EN 55032/35
EMI-CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
- IEC 61000-4-5 Surge: Power: 1 kV
- IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
- IEC 61000-4-8 PFMF
Environmental testing
- IEC 60068-2-1
- IEC 60068-2-2
- IEC 60068-2-3
Safety -UL 60950-1
Vibration-IEC60068-2-6

MTBF
- Time 2,781.161 hours
- Standards Telcordia(Bellcore), GB