VPORT 461A-T - Full Motion, 1-ch industrial video encoder, 2 10100BaseT(X) Ethernet ports, -40

Moxa’s industrial video servers are designed to perform reliably even in harsh environments, making them ideal to serve as the core of a remote monitoring or surveillance solution. Our video servers are capable of using efficient MPEG-4 video compression and allow for easy integration of CCTV cameras into your IP surveillance solution.

Full Motion, 1-ch industrial video encoder, 2 10/100BaseT(X) Ethernet ports, -40 to 75°C operating temperature

Memory
- SD Slot SDXC

Input/Output Interface
- Digital Input Channels 2
- Digital Inputs
+13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
- Relay Channels 2
- Contact Current Rating Resistive load: 1 A @ 24 VDC
- Connector Terminal block

Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector) 2

Ethernet Software Features
- Protocols
TCP/IP
IPv4/IPv6
UDP
HTTP
RTP/RTSP
ARP
UPnP
FTP
TFTP
NTP Client
DNS
QoS
IGMP v3
ICMP
SNMPv1/v2c/v3
Modbus TCP
HTTPS
802.1X
NTCIP

Security Functions
- Password User-level password protection
- Filter IP address
- Authentication 802.1X
- Encryption
HTTPS
SSH

LED Interface
- LED Indicators
STAT: Indicates if system is booted up properly or not
Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted
SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps

Serial Interface
- PTZ Port 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
- COM Port 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
- Console Port 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)

Power Parameters
No. of Power Inputs
2
Input Voltage
Redundant dual inputs
Operating Voltage
12 to 32 VDC, 18 to 30 VAC
Input Current
0.64 A @ 12 VDC, 0.18 A @ 32 VDC
0.59 A @ 18 VAC
0.35 A @ 30 VAC
Power Connector
2-pin terminal block

Video Interface
- Video Compression H.264 (ISO/IEC 14496-10) or MJPEG
- Video Input 1, BNC connector (1.0 Vpp, 75 ohm)
- Video Output via Ethernet
- Video Streams 4 independent H.264 or MJPEG video streams
- NTSC/PAL Auto-sensing or manual
- Video Viewing
DynaStreamâ„¢ support for changing the video frame rate automatically
CBR Proâ„¢ for good image quality in limited bandwidth transmissions
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Image tuning: control brightness, contrast, saturation
Maximum of 10 simultaneous unicast connections, 50 multicast clients

Audio Interface
- Audio Inputs 1 Line-in or MIC-in with 3.5 mm phone jack
- Audio Outputs 1 Line-out, with 3.5 mm phone jack
- Audio Format Mono, PCM (G.711)

Camera Software Development
- Video Standards ONVIF Profile S

Camera PAN/TILT/ZOOM
- PTZ Camera Control Via PTZ port or COM port
- PTZ Control Functions Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
- PTZ Function Updates Driver upload supported
- Protocols Pelco D, Pelco P, Custom Camera

Camera Alarm Software Features
- Intelligent Video Camera tampering detection
- Video Motion Detection 3 independently configurable areas
- Scheduling Daily repeat timing schedule
- Imaging JPEG snapshots for pre/trigger/post alarm images
- Custom Alarms HTTP event servers for setting customized alarm actions
- FTP Messaging Automatic transfer of stored images via FTP as event-triggered actions
- Pre-Alarm Buffer 50 MB video buffer for JPEG snapshot images
- Video Recording Event recordings stored on the SD card

Software Requirements
- Memory Size 1 GB
- Operating System Windows 7 or above
- Browser Internet Explorer 9.x or above
- Multimedia DirectX 9.0C or above

Physical Characteristics
- Housing Metal
- Dimensions 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
- Weight 710 g (1.57 lb)
- Installation
- DIN-rail mounting
- Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Altitude 2000 m

Standards and Certifications
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Freefall IEC 60068-2-31
- Safety UL 60950-1
- Shock IEC 60068-2-27
- Vibration IEC 60068-2-6

MTBF
- Time 862,568 hrs
- Standards Telcordia SR332