IOLOGIK R1212-T - Universal IO, 8 DIs, 8 DIOs, -40 to 85C Operating temperature

Our universal controllers and I/O products use Click&Go control logic, which includes our active monitoring technology and support for a versatile range of OT/IT protocols to enable you to easily configure, deploy and realise IIoT applications such as energy monitoring, plant monitoring and machine OEM applications.

Universal I/O, 8 DIs, 8 DIOs, -40 to 85°C operating temperature

Input/Output Interface
Buttons -Reset button
Configurable DIO channels (via software) -8
Digital input channels-8
Isolation-3k VDC or 2k Vrms

Digital inputs
Connector-Screw-on Euroblock terminal
Counter frequency -2.5 kHz
Time interval for digital filtering -software configurable
Dry contact
- On: short to GND
- Off: open
I/O mode -DI or event counter
Points per COM -8 channels
Sensor type
- Dry contact
- Wet contact (NPN or PNP)
Wet contact (DI to COM)
- On: 10 to 30 VDC
- Off: 0 to 3 VDC

Digital outputs
Connection-Screw-on Euroblock terminal
Rated current -200mA per channel
I/O mode-DO or pulse output
I/O type-sink
Pulse output frequency -5kHz
Overcurrent protection-0.65A per channel at 25°C
Over-temperature shutdown -175°C(typical), 150°C (min.))
Overvoltage protection-45 VDC (typical)

LED interface
LED indicators -PWR, RDY, P1, P2

Serial interface
Baud rate-1200 bps to 921,6 kbps
Terminal block
Numberofconnections-2
Parity
- None
- Even
- Odd
Pull high/low resistor for RS-485 -1 kilo-ohm, 150 kilo-ohms
Serial Standards-RS-485
Stop Bits -1, 2
Surge-1 kV
ESD-15 kV
Data Bits -8
Flow Control
- None
- XON/XOFF

Serial Signals
RS-485-2w -Data+, Data-, GND

Serial software features
Industrial protocols-Modbus RTU Server (Slave)

Power parameters
Power connection -Euroblock terminal with screw cap
Number of power inputs -1
Input voltage-12 to 48 VDC
Current consumption -187mA @ 24 VDC

Physical properties
Housing plastic
Dimensions -27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight-200 g (0. 44 lb)44 lb)
Installation
- DIN rail mounting
- Wall mounting
Wiring
- I/O cable, 16 to 26 AWG
- Power cable, 12 to 24 AWG

Ambient conditions
Operating temperature --40 to 85°C (-40 to 185°F)
Storage temperature (in packaging) --40 to 85°C (-40 to 185°F)
Relative humidity -5 to 95% (non-condensing)
Altitude -2000 m

Standards and certifications
EMC-EN 55032/24
EMI-CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 0.5 kV
- IEC 61000-4-5 Surge: Power: 2 kV
- IEC 61000-4-6 CS: 3 V
- IEC 61000-4-8 PFMF
Safety -UL508
Shock-IEC 60068-2-27
Vibration-IEC60068-2-6

Declaration
Environmentally friendly product -RoHS, CRoHS, WEEE

MTBF
Time -1.239,293 hrs
Standards -TelcordiaSR332