PWR-105-HV-I - Power supply module for the EDS-4000G4000 series

Introduction
The PWR-100 series power modules are designed for the Moxa EDS-4000/G4000 series switches. The power supply modules allow the supported switches to use 12/24/48 VDC or 110/220 VDC/VAC.

PWR-105-HV-I
PWR-100 power supply module series
Power supply module for the EDS-4000/G4000 series with 110/220 VDC/VAC single input, current isolation, 88 to 300 VDC or 85 to 264 VAC operating voltage

Power supply parameters
Note
The device model name and the power supply parameters of the EDS-4000/G4000 series are determined by the installed PWR-100 power supply module.

PWR-100-LV: -LV/-LV-T models
PWR-105-HV-I: -HV/-HV-T models
PWR-101-LV-BP-I: -LVA/-LVA-T models (PoE support)
PWR-103-LV-VB-I: -LVB/-LVB-T models (PoE support)

For example:
EDS-G4008-T + PWR-100-LV = EDS-G4008-LV-T
EDS-G4008-T + PWR-105-HV-I = EDS-G4008-HVT

If you install a different power supply module, observe the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4008-LV-T with the PWR-105-HV-I, observe the specifications of the EDS-G4008-HV-T.

Power over Ethernet:
Only the models EDS-4008-4P-2GT-2GS(-T), EDS-4012-8P-4GS(-T) and EDS-G4012-8P-4QGS(-T) support PoE. If a PoE-capable module of the PWR-100 series (PWR-101-LV-BP-I, PWR-103-LV-VB-I) is installed in a non-PoE-capable model of the EDS-4000/G4000 series, the PoE functionality is not available.
Connection: 2 detachable 4-contact terminal block(s)
Input voltage: 110/220 VDC/VAC VDC
Operating voltage: 88 to 300 VDC, 85 to 264 VAC
Input current: 110 to 220 VAC, 50 to 60 Hz, 0.30 to 0.20 A or 110 to 220 VDC, 0.30 to 0.20 A
Number of current inputs: One input
Overload protection: Supports
Reverse polarity protection: Supports

Physical characteristics
Dimensions: 103 x 98 x 39.9 mm (4.06 x 3.86 x 1.57 in.)
Weight: 215 g (0.47 lb)

Environmental limits
Operating temperature: The operating temperature depends on the EDS-4000/G4000 switch in which the module is installed. Further information can be found in the respective data sheet for the EDS-4000/G4000 series.
Storage temperature: -40 to 85°C
Relative humidity: 5 to 95% (non-condensing)

Standards and certifications
Safety: EN 62368-1 (LVD)
EMI: FCC Part 15 Subpart B Class A
EMC:
EN 55032/35
EN 61000-6-2/-6-4
EMS:
EN 61000-4-2 (ESD) Level 4
EN 61000-4-3 (RS) Level 3
EN 61000-4-4 (EFT) Level 4
EN 61000-4-5 (Surge) Level 4
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 Level 4
Vibration: ISTA 1A