IOLOGIK E1242-T - Universal IO, 4 AIs, 4 DIs, 4 DIOs, -40 to 75C Operating temperature

Universal I/O, 4 AIs, 4 DIs, 4 DIOs, -40 to 75°C Operating temperature

Input/output interface
Digital input channels
- 4
Configurable DIO channels (by jumper)
- 4
Analogue input channels
- 4
Isolation
- 3k VDC or 2k Vrms
Buttons
- Reset button Reset button

Digital inputs
Connection
- Screwable Euroblock terminal
Sensor type
- Dry contact
- Wet contact (NPN or PNP)
I/O mode
- DI or event counter
Dry contact
- On: Short circuit to GND
- Off: open
Wet contact (DI to COM)
- On: 10 to 30 VDC
- Off: 0 to 3 VDC
Counter frequency
- 250 Hz
Digital filter time interval
- Software configurable
Points per COM
- 4 channels

Digital outputs
Connection
- Screw-type Euroblock terminal Screwable Euroblock terminal
I/O type
- Sink
I/O mode
- DO or pulse output
Nominal current
- 200 mA per channel
Pulse output frequency
- 500 Hz (max.))
Overcurrent protection
- 2.6 A per channel at 25°C
Overtemperature shutdown
- 175°C (typical), 150°C (min.))
Overvoltage protection
- 35 VDC

Analogue inputs
Connection
- Screwable Euroblock terminal
I/O mode
- Voltage/current
I/O type
- Differential
Resolution
- 16 bits
Input range
- 0 to 10 VDC
- 0 to 20 mA
- 4 to 20 mA
- 4 to 20 mA (with burn-out detection)
Accuracy
- ±0.1% FSR @ 25°C
- ±0.3% FSR @ -10 to 60°C
- ±0.5% FSR @ -40 to 75°C
Sampling rate
- 12 samples/sec. per module (shared by up to 4 channels)
Built-in resistor for current input
- 120 Ohm
Input impedance
- 10 Mega-Ohm (min.)

Ethernet interface
10/100BaseT(X) ports (RJ45 connector)
2, 1 MAC address (Ethernet bypass)
Magnetic isolation protection
1.5 kV (built-in)

Ethernet Software Features
Configuration Options
- Web Console (HTTP), Windows Utility (ioSearch), MCC Tool
Industrial Protocols
- Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, EtherNet/IP Adapter
Management
- RESTful API, SNMPv1/v2c, SNMPv1 Trap, HTTP, DHCP Client, BOOTP, IPv4, TCP/IP, UDP
MIB
- Device settings MIB
Security
- Access control list

Security functions
Authentication
- Local database

LED interface
LED indicators
- Power, Ready, Port 1, Port 2

Modbus TCP
Supported functions
- 1, 2, 3, 4, 5, 6, 15, 16, 23
Mode
- Server (Slave)
Max. Max. number of client connections
- 10

EtherNet/IP

Mode
- Adapter
Max. number of scanner connections - 10 Max. number of scanner connections
- 9 (for read-only), 1 (for read/write)

Performance parameters
Power connection
- Screwable Euroblock terminal
Number of power inputs
- 1
Input voltage
- 12 to 36 VDC
Power consumption
- 139 mA @ 24 VDC

Physical properties
Housing
- Plastic
Dimensions
- 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight
- 200 g (0.44 lb)
Installation
- DIN rail mounting
- Wall mounting
Cabling
- I/O cable, 16 to 26 AWG
- Power cable, 12 to 24 AWG

Ambient conditions
Operating temperature
- -40 to 75°C (-40 to 167°F)
Storage temperature (in packaging)
- -40 to 85°C (-40 to 185°F)
Relative humidity
- 5 to 95% (non-condensing)
Altitude
- 4000 m

Standards and certifications
EMC
- EN 55032/24, EN 61000-6-2/-6-4
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
Hazardous areas
- ATEX, Class I Division 2
Safety
- UL 508
Shock
- IEC 60068-2-27
Free fall
- IEC 60068-2-32
Vibration
- IEC 60068-2-6

Declaration
Environmentally friendly product
- RoHS, CRoHS, WEEE

MTBF
Time
- 502.210 hours
Standards
- Telcordia SR332