VPORT P16-1MP-M12-IR-CAM80-CT - EN50155, HD image, fixed dome IP camera, PoE, M12 connection

Introduction
The robust VPort P16-1MP-M12-IR cameras produce HD video images (720P, 1280 x 720) and feature 3 H.264/MJPEG video streams, giving them the versatility and robustness required for mobile IP video surveillance applications in a variety of different installations and environments. In addition, the cameras are vandal-resistant (EN 62262 IK10), have an operating temperature of -25 to 55°C or -40 to 70°C (T models), a robust M12 Ethernet connection, PoE power input, built-in microphone, digital input, IP66 rain and dust protection, IR illuminator for day and night images and fulfil the mandatory sections of EN 50155.

EN50155, HD image, fixed dome IP camera, PoE, M12 connection, IR, MIC, 1 DI, 8.0 mm lens, -25 to 55°C operating temperature, conformal coating

Input/output interface
Digital input channels: 1
Digital inputs: +13 to +30 V for state 1, -30 to +1 V for state 0, Max. input current: 8 mA, Max. input current: 8 mA. Input current: 8 mA
Connector: 5-pin A-coded M12 connector with 20 cm cable

Ethernet interface
PoE ports (10/100BaseT(X), M12 D-coded 4-pin socket): 1
Standards: IEEE 802.3af for PoE

Ethernet software functions
Protocols: TCP/IP, IPv4, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS

Security functions
Password: Password protection at user level
Filter: IP address
Encryption: HTTPS

Performance parameters
Number of power inputs: 1
Input power source: PoE (IEEE 802.3af)
Input current: 0.19 A @ 48 VDC

Camera features
-Sensor: 1/2.7-in HD progressive scan CMOS
-Lens: f=8.0 mm, F1.6, diagonal 45°, horizontal 40°, vertical 22°
-Minimum illumination: Colour: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec.)
B/W: 0.05 lux, at F1.2 (gain high, 50 IRE, 1/30 sec.)
Note: 0 lux when IR illuminator is switched on
-Camera angle: Pan 350°, tilt 65° (manually controlled)
-Day & night: Auto/colour/BW; ICR control
-Synchronisation: Internal
-White balance: ATW/AWB
-Electronic shutter: Auto, fixed (1/30 to 1/25000 sec.))
-/N ratio: Maximum 50 dB (AGC off; DNR on)
-ICR control: Auto (light sensor control) or DI control
-IR illumination: IR LED spotlight, 5 metres (max.) effective distance; on/off control manually (night mode) or via the light sensor
-DNR (digital noise reduction): Built-in 2D/3D DNR
-WDR (Wide Dynamic Range): 110 dB
-Flicker-free control: automatic, 50 Hz, 60 Hz modes
-Image rotation: rotate, flip and 180° rotation
-Image adjustment: manual adjustment with saturation, sharpness and contrast
-AGC (automatic gain control): 2X, 4X, 8X, 16X, 32X, 64X
-BLC (backlight compensation): High/Medium/Low

Video interface
-Video compression: H.264 (ISO/IEC 14496-10) or MJPEG
-Video output: via Ethernet
-Video streams: 3 independent H.264 or MJPEG video streams
-Video resolution and FPS (frames per second)
-Video viewing:
DynaStreamâ„¢ support for automatic video frame rate change
CBR Proâ„¢ for good image quality in limited bandwidth transmissions
3 areas for privacy masks
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Maximum 5 simultaneous unicast connections, 50 multicast clients

Audio interface
Audio format: mono, PCM (G.711)
Audio inputs: 1 x built-in microphone

Camera software development
-VPort SDK PLUS: Contains CGI commands, ActiveX control and API library for customised applications or system integration for third-party developers
-Video standards: ONVIF Profile S

Camera alarm software functions
Intelligent video: Detection of camera tampering
Video motion detection: 3 independently configurable areas
Scheduling: Schedule for daily repetitions
Imaging: JPEG snapshots for pre/trigger/post-alarm images
Custom alarms: HTTP event server for setting custom alarm actions
Email/FTP messaging: Automatic transmission of saved images via email or FTP as event-triggered actions
Pre-alarm buffer: 12 MB video buffer for JPEG snapshots

Software requirements
Memory size: 1 GB
Operating system: Windows 7 or higher
Browser: Internet Explorer 9.x or higher
Multimedia: DirectX 9.0C or higher

Physical characteristics
-Casing: IP66 rain and dust protection, metal housing, PC dome cover, IK10 vandalism protection
-Dimensions: 125 x 125 x 120.7 mm (4.92 x 4.92 x 4.8 inches)
-Weight: 870 g (1.92 lb)
-Installation: panel mount
-Protection: PCB compliant coating

Environmental limits
Operating temperature: -25 to 55°C (-13 to 131°F)
Storage temperature (packaging included): -40 to 85°C (-40 to 185°F)
Ambient relative humidity: 5 to 95% (non-condensing)
Ingress protection: IEC 60529, IP66
Salt spray test: ASTM-B117
Vandalism resistance: EN 62262, IK10
Altitude: 2000 m

Standards and certifications
-EMI: CISPR 32, FCC Part 15B Class A
-EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-Free-fall: IEC 60068-2-31
-Railway fire protection: EN 45545-2
-Safety: UL 60950-1
-Shock: IEC 60068-2-27, IEC 61373, EN 50155
-Vibration: IEC 60068-2-64, IEC 61373, EN 50155
-Railway: EN 50155 (fulfils part of the EN 50155 specifications)

MTBF
Time: 1.052,184 hours
Standards: Telcordia SR332