VPORT 461A - Full motion, 1-channel industrial video encoder, 2 10/100BaseT(X) Ethernet connections

Moxa's industrial video servers are designed to operate reliably in harsh environments, making them ideal for use as the centrepiece of a remote surveillance solution. Our video servers are able to utilise efficient MPEG-4 video compression and enable easy integration of CCTV cameras into your IP surveillance solution.

Full motion, 1-channel industrial video encoder, 2 10/100BaseT(X) Ethernet ports, -25 to 60°C operating temperature

Memory
- SD slot: SDXC

Input/output interface
- Digital input channels: 2
- Digital inputs:
+13 to +30 V for state 1
-30 to +1 V for state 0
- Max. Input current: 8 mA
- Relay channels: 2
- Current carrying capacity of the contacts: Resistive load: 1 A @ 24 VDC
- Connection: Terminal block

Ethernet interface
- 10/100BaseT(X) ports (RJ45 connection): 2

Ethernet Software Features
- Protocols:
TCP/IP
IPv4/IPv6
UDP
HTTP
RTP/RTSP
ARP
UPnP
FTP
TFTP
NTP Client
DNS
QoS
IGMP v3
ICMP
SNMPv1/v2c/v3
Modbus TCP
HTTPS
802.1X
NTCIP

Security functions
- Password: Password protection at user level
- Filter: IP address
- Authentication: 802.1X
- Encryption: HTTPS, SSH

LED interface
- LED indicators:
- STAT: Indicates whether the system has booted up properly or not
- Power 1: Power 1 on/off
- Power 2: Power 2 on/off
- FAULT: Can be configured to correspond to a system alarm, power failure or interrupted network connection
- Video: Video input signal
- PTZ: Indicates whether PTZ or COM port data has been transmitted
- SD: Indicates whether the SD card has been successfully inserted
- Network: 10 Mbps or 100 Mbps

Serial port
- PTZ port: 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbit/s
- COM port: 1, RS-232 or RS-485 port, DB9 connector, 115.2 kbit/s
- Console port: 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)

Power parameters
- Number of power inputs: 2
- Input voltage: Redundant dual inputs
- Operating voltage: 12 to 32 VDC, 18 to 30 VAC
- Input current:
0.64 A @ 12 VDC, 0.18 A @ 32 VDC
0.59 A @ 18 VAC
0.35 A @ 30 VAC
- Power connection: 2-pin terminal block

Video interface
- Video compression: H.264 (ISO/IEC 14496-10) or MJPEG
- Video input: 1, BNC connection (1.0 Vpp, 75 Ohm)
- Video output: via Ethernet
- Video streams: 4 independent H.264 or MJPEG video streams or MJPEG video streams
- NTSC/PAL: automatic or manual detection
- Video resolution and FPS (frames per second)

Video display
- DynaStreamâ„¢ support for automatic change of video frame rate
- CBR Proâ„¢ for good picture quality for transmissions with limited bandwidth
- Adjustable picture size and quality
- Time stamp and text overlay
- OSD (On Screen Display) position adjustable
- Picture optimisation: Control of brightness, contrast, saturation
- Maximum 10 simultaneous unicast connections, 50 multicast clients

Audio interface
- Audio inputs: 1 line-in or MIC-in with 3.5 mm jack plug
- Audio outputs: 1 line-out, with 3.5 mm jack plug
- Audio format: mono, PCM (G.711)

Development of the camera software
- Video standards: ONVIF profile S

Camera PAN/TILT/ZOOM
- PTZ camera control: Via PTZ port or COM port
- PTZ control functions: Pan, tilt, zoom, focus, movement speed, preset position (max. 128 positions)
- PTZ function updates: Driver upload supported
- Protocols: Pelco D, Pelco P, Custom camera

Camera alarm software functions
- Intelligent video: Detection of camera tampering
- Video motion detection: 3 independently configurable areas
- Scheduling: schedule for daily repetitions
- Imaging: JPEG snapshots for pre/trigger/post-alarm images
- Custom alarms: HTTP event server for setting custom alarm actions
- FTP messaging: Automatic transmission of saved images via FTP as event-triggered actions
- Pre-alarm buffer: 50 MB video buffer for JPEG snapshots
- Video recording: Event recordings are saved on the SD card

Software requirements
- Memory size: 1 GB
- Operating system: Windows 7 or higher
- Browser: Internet Explorer 9.x or higher
- Multimedia: DirectX 9.0C or higher

Physical characteristics
- Housing: metal
- Dimensions: 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
- Weight: 710 g (1.57 lb)
- Installation: DIN rail mounting
- Wall mounting (with optional kit)

Environmental conditions
- Operating temperature: -25 to 60°C (-13 to 140°F)
- Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
- Ambient relative humidity: 5 to 95% (non-condensing)
- Altitude: 2000 m

Standards and certifications
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Free fall: IEC 60068-2-31
- Safety: UL 60950-1
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6

MTBF
- Time 862.568 hours
- Standards Telcordia SR332