VPORT P16-2MR80M-CT - EN50155, day/night, IR, 1080P IP camera, 8.0 mm lens, PoE, M12 connector
Introduction
The robust VPort P16-2MR cameras produce Full HD video images (1920 x 1080) and feature 4 H.264/MJPEG video streams, giving them the versatility and robustness required for mobile IP video surveillance applications in a variety of different installations and environments. In addition, the cameras feature vandal resistance (EN 62262 IK8), an operating temperature of -25 to 55°C or -40 to 70°C (T models), a robust M12 Ethernet connection, PoE power input, an integrated microphone, digital input, IP66 rain and dust protection, an IR illuminator for day and night images and fulfil the mandatory sections of EN 50155.
Memory
microSD slot: SDXC
Input/output interface
Digital input channels: 1
Digital inputs
+13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA Connector: 8 mA Input current: 8 mA
Connector: 5-pin A-coded M12 connector with 20 cm cable
Ethernet interface
PoE ports (10/100BaseT(X), M12 D-coded 4-pin socket): 1
Standards
IEEE 802.3af for PoE
Ethernet Software features
Protocols
TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS
Security functions
Password
Password protection at user level
Filter
IP address
Encryption
HTTPS
Performance parameters
Number of power inputs: 1
Source of input power
PoE (IEEE 802.3af)
Input current
0.26 A @ 48 VDC
Camera characteristics
Sensor: 1/3-in 1080P progressive scan CMOS
Lens
VPort P16-2MR80M series: f=8.0mm, F1.6, diagonal 42°, horizontal 33°, vertical 17°
Minimum illumination
Colour: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
B/W: 0.05 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
Note: 0 lux with IR illuminator switched on
Camera angle
Pan 350°, tilt 65° (manually controlled)
Day & night
Auto/colour/BW; ICR control
Synchronisation
Internal white balance
ATW/AWB
Electronic shutter
Auto, fixed (1/30 to 1/25000 sec.)
S/N ratio
Maximum 50 dB (AGC off; DNR on)
ICR control
Auto (light sensor control) or DI control
IR illumination
IR LED illuminator, 5 metres (max.) effective distance; On/off control manually (night mode) or via the light sensor
DNR (digital noise reduction)
Built-in 2D/3D DNR
WDR (Wide Dynamic Range)
100 dB
AGC (automatic gain control)
2X, 4X, 8X, 16X
Flickerless Control
Automatic, 50 Hz, 60 Hz modes
Image rotation
Mirror, 90°, 180°, 270° rotation
Image adjustment
Manual adjustment with saturation, sharpness and contrast
Video interface
Video compression
H.264 (ISO/IEC 14496-10) or MJPEG
Video output
via Ethernet
Video streams
4 independent H.264 or MJPEG video streams
Video resolution and FPS (frames per second)
Further information
Video viewing
DynaStreamâ„¢ support for automatic video frame rate change
CBR Proâ„¢ for good image quality for transmissions with limited bandwidth
3 areas for data protection masks
Adjustable image size and qualityquality
Time stamp and text overlay
OSD (On Screen Display) position adjustable
Maximum 5 simultaneous unicast connections, 50 multicast clients
Audio interface
Audio format : Mono, PCM (G.711), AAC
Audio inputs
1 x built-in microphone
Camera software development
Video standards
ONVIF profile S
Camera alarm software functions
Intelligent video
Camera tampering detection
Video motion detectionMotion detection
3 independently configurable areas
Shock detection
Built-inG sensor
Scheduling
Daily recurring schedule
Imaging
JPEG snapshots for pre-trigger/post-trigger/post-alarm /trigger/post-alarm images
Custom alarms
HTTP event server for setting custom alarm actions
Email/FTP messages
Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm buffer
50 MB video buffer for JPEG snapshots
Video recording
Event recordings on SD card
Software requirements
Memory Siz: 2 GB
Operating system
Windows 7 or higher
Browser
Internet Explorer 9.x or higher
Multimedia
DirectX 9.0C or higher
Physical properties
Housing:
IP66 rain and dust protection
Metal housing, PC dome cover
IK8 vandalism protection
Dimensions
125 x 125 x 120.7 mm (4.92 x 4.92 x 4.8 in)
Weight
890 g (1.96 lb)
Installation
Panel mounting
Protection
-CT models: PCB-compliant coating
Ambient conditions
Operating temperature:
Standard models: -25 to 55°C (-13 to 131°F)
Wide temp. Models: -40 to 70°C (-40 to 158°F)
Storage temperature (including packaging)
-40 to 85°C (-40 to 185°F)
Relative humidity
5 to 95% (non-condensing)
Ingress protection
IEC 60529, IP66
Salt spray test
ASTM-B117
Vandalism resistance
EN 62262, IK8
Altitude
2000 m
Standards and certifications
EMI: CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Free fall
IEC 60068-2-31
Railway fire protection
EN 45545-2
Safety
UL 60950-1
Shock
IEC 60068-2-27, IEC 61373, EN 50155
Vibration
IEC 60068-2-64, IEC 61373, EN 50155
Railway
EN 50155 (fulfils part of the EN 50155 specifications)
MTBF
Time 997.474 hours
Standards Telcordia SR332