QuMax for Peplink MAX BR1 Pro 5G CAT-20

INTEGRATED MULTI-BAND 5G DIRECTIONAL ANTENNA + WIFI OMNI ANTENNA + GPS ANTENNA + PLACE TO INSTALL PEPLINK MAX BR1 PRO 5G & CAT-20 (ALL-IN-ONE)
QuMax all-in-one antenna for Peplink MAX BR1 Pro 5G & CAT-20 router is dedicated to connections with long distance to base station. It has embedded directional 5G, Wi-Fi and GPS antenna. If you use MAX BR1 Pro 5G or CAT-20 with QuMax Omni antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. It is the first choice for fixed installations in industrial environment.

The set contains a Passive PoE splitter, allowing you to split data and power from a single Ethernet cable and maintain gigabit transfer speeds while protecting the LAN port from damage caused by overvoltage, short circuit or improper connection.

5G/LTE SPECIFICATION
- FREQUENCY
617 - 960 MHz
1.7 - 2.7 GHz
3.3 - 4.6 GHz
4.7 - 6.0 GHz
- SUPPORTED LTE BANDS
1, 2, 3, 4, 5, 7, 8, 9, 10, 12, 13, 14, 17, 18, 19, 20, 22, 25, 26, 27, 28, 29, 30, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 46, 47, 48, 49, 52, 53, 65, 66, 67, 68, 69, 71, 85, 103, 06
- SUPPORTED 5G BANDS
n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n34, n38, n39, n40, n41, n46, n47, n48, n53, n65, n66, n67, n71, n77, n78, n79, n80, n81, n82, n83, n84, n85, n86, n89, n90, n95, n97, n98, n100, n101, n256
- GAIN
617 - 960 MHz : 6 dBi
1.7 - 2.7 GHz : 7 dBi
3.3 - 4.6 GHz : 7 dBi
4.7 - 6.0 GHz : 5.5dBi
- VSWR <2.00, max <3.00
- BEAMWIDTH 80°/80° ±15°
- POLARIZATION Vertical
- IMPEDANCE 50 Ω

WI-FI SPECIFICATION
- FREQUENCY
2.4 - 2.5 GHz
5.0 - 7.2 GHz
- GAIN
2.4 - 2.5 GHz: 6dBi
5 GHz: 7.5dBi
7 GHz: 7.5dBi
- VSWR < 1.50, max < 2.00
- BEAMWIDTH 360°/25° +/- 5°
- POLARIZATION Vertical
- IMPEDANCE 50 Ω

MECHANICAL SPECIFICATION
- MATERIAL BS, aluminum, PTFE, Fiberglass
- INGRESS PROTECTION IP67
- CONNECTOR TYPE RJ45
- DIMENSIONS
486.0 x 292.2 x 210 mm
19.13 x 11.50 x 8.27 inch
- WEIGHT
1.8 kg
3.97 lbs
- OPERATING TEMPERATURE
From -40°C to 75°C
From -40°F to 167°F

MOUNTING KIT
- DIMENSIONS
9.9 x 10.5 x 14.8 cm
3.9 x 4.13 x 5.83 inch
- REGULATION RANGE +/- 30°
- MAST DIAMETER RANGE
25 - 60mm
0.98-2.36 inch
- MATERIAL Polyamide with fiberglass + galvanized steel U-Bolts
- WEIGHT 0.87kg
- MOUNTING PLACE Wall or mast or ceiling