20 or more:
1.187,29 EUR
50 or more:
1.176,60 EUR
200 or more:
1.165,90 EUR
1000 or more:
1.155,20 EUR
U4Q2CQA-S2-CI - T.0X - Multiplex converter 4 DVB-S2 in 2 QAMCOFDM,CI
Deliverytime: 10 - 12 working days (Mo-Fr) *
Key points at a glance:
Product Description
Twin converter with REMUX DVB-S/S2 into DVB-T (COFDM) or DVB-C (QAM), with CI
Channel strip for converting 4 satellite transponders DVB-S (QPSK) or DVB-S2 (QPSK/8PSK) from max. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels.
Its CI interface and the corresponding CAM module convert encrypted channels into free DVB-T/T2 or DVB-C signals. Depending on the CAM module used (standard/professional), one or more services are decrypted.
The desired output modulation can be selected via an embedded web user interface.
Highlights
Embedded web user interface for module configuration:
- Selection of output modulation: COFDM (DVB-T) or QAM (DVB-C)
- Configuration of the entire headend, selecting one of the modules as master
- Automatic detection of the modules connected to the master
- Cloning function for replication and faster setup of typical installations
- Headend control indicators: module temperature, CAM status ..
- Access to the headend configuration via a self-created WiFi network (using the kit with ref. no. 216802)
- Complete or selective removal of individual services so that they are not unintentionally detected (and saved) by the receivers (STB)
Adjacent channel capability
- Supports LCN (Logical Channel Numbering) for individual channel sequencing to simplify the receiver scan
- Programme filtering required to adapt to the maximum output data rate. Information about the utilisation of the output signal
- Monitoring and signal status display via LEDs
Features
- The outputs can also be configured both in loop-through mode and independently of each other
- Service decryption after insertion of a corresponding CA module incl. card
- Filling with zero packets (stuffing unit) for a fast scan in the receiver or when using a receiver with fixed symbol rates
- PIDs can be edited
- Editable TS_ID to facilitate programming of the receiver. Performs the channel scan based on the data listed above
- Network_ID, Original Network_ID, Cell_ID and S_ID editable
Channel strip for converting 4 satellite transponders DVB-S (QPSK) or DVB-S2 (QPSK/8PSK) from max. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels.
Its CI interface and the corresponding CAM module convert encrypted channels into free DVB-T/T2 or DVB-C signals. Depending on the CAM module used (standard/professional), one or more services are decrypted.
The desired output modulation can be selected via an embedded web user interface.
Highlights
Embedded web user interface for module configuration:
- Selection of output modulation: COFDM (DVB-T) or QAM (DVB-C)
- Configuration of the entire headend, selecting one of the modules as master
- Automatic detection of the modules connected to the master
- Cloning function for replication and faster setup of typical installations
- Headend control indicators: module temperature, CAM status ..
- Access to the headend configuration via a self-created WiFi network (using the kit with ref. no. 216802)
- Complete or selective removal of individual services so that they are not unintentionally detected (and saved) by the receivers (STB)
Adjacent channel capability
- Supports LCN (Logical Channel Numbering) for individual channel sequencing to simplify the receiver scan
- Programme filtering required to adapt to the maximum output data rate. Information about the utilisation of the output signal
- Monitoring and signal status display via LEDs
Features
- The outputs can also be configured both in loop-through mode and independently of each other
- Service decryption after insertion of a corresponding CA module incl. card
- Filling with zero packets (stuffing unit) for a fast scan in the receiver or when using a receiver with fixed symbol rates
- PIDs can be edited
- Editable TS_ID to facilitate programming of the receiver. Performs the channel scan based on the data listed above
- Network_ID, Original Network_ID, Cell_ID and S_ID editable
