FC311A-20 - Media converter, WDM technology, 1550 nm

What this product does
FC311A-2 (TL-FC311A-2) is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fibre port that can convert between electrical and optical signals. Long-distance data transmission through fibre optic cable can be used in commercial scenarios such as park surveillance and wireless networks.

How the product works
The FC311A-2 (TL-FC311A-2) uses Wavelength Division Multiplexing (WDM) technology and enables data to be sent and received over a distance of up to 2 km using only a single-mode fibre, saving customers half the cost of laying cables. The FC311A-2 transmits data at a wavelength of 1550 nm and receives data at a wavelength of 1310 nm via optical fibre. Therefore, the end device used in conjunction with the FC311A-2 should transmit data at a wavelength of 1310 nm and receive data at a wavelength of 1550 nm. TP-Link another media converter FC311B-2 is one of the products that can work together with FC311A-2.

Other features
In addition, this media converter can be used as a standalone device (no rack required) or with TP-Link's FC1420 rack for Auto-MDI/MDI-X in the TX port, where the duplex mode is automatically negotiated.

NETZ
Standards and protocols IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z

ENVIRONMENT
Operating temperature 0ËšC to 50ËšC (32ËšF to 122ËšF)
Storage temperature -40ËšC to 70ËšC (-40ËšF to 158ËšF)
Humidity during operation 10% to 90% RH non-condensing
Humidity during storage 5% to 90% RH non-condensing

HARDWARE-FUNCTIONS
Interface - 1× Gigabit SC fibre port
- 1× 10/100/1000 Mbps RJ45 port (Auto MDI/MDIX)
Cable - Single-mode fibre (9/125μm, maximum 20km)
- UTP category 5, 5e cable (maximum 100m)

- Power supply External power adapter: 5 V/0.6 A

- LED PWR, Link/Act
- Wavelength 1550 nm TX, 1310 nm RX
- Dimensions (W*D*H) 3.7×2.9×1.1 in (94.5×73.0×27.0 mm)

OTHER
- Package contents - Media Converter FC311A-2
- Power Adapter
- Installation manual