20 or more:
63,84 EUR
50 or more:
63,29 EUR
200 or more:
62,73 EUR
500 or more:
62,18 EUR
1000 or more:
61,62 EUR
2500 or more:
61,06 EUR
41471 - USB GaN charger 1 x USB Type-C PD 3.1 with 140 W
Deliverytime: 365 - 367 working days (Mo-Fr) *
available: > 100
Key points at a glance:
Product Description
Description
This USB charger by Delock can be used to supply a USB device with power. The port is equipped with USB Type-Câ„¢ Power Delivery (PD 3.1), allowing supported devices to be charged with up to 140 watts.
USB-PD Version 3.1
The USB PD 3.1 specification defines the voltage levels 28, 36 and 48 volts with support for Extended Power Range (EPR) with 5 amps each. With a calculated maximum power of 240 W (48 V / 5 A), other device classes can also be supplied with power in addition to powerful notebooks and desktop PCs. The Delock charger is characterised by an output power of 28 V and 5 A.
GaN technology
The use of GaN (gallium nitride) transistors increases the efficiency compared to conventional silicon technology. This means that a high output power can be achieved even with very compact dimensions.
Note
For EPR mode (28, 36, 48 V / 5 A), a USB cable with a corresponding E-marker is mandatory. If this E-marker is not available, max. 3 A are transmitted.
Corresponding cables from Delock are optionally available.
Technical data
- Connection 1: 1 x USB Type-Câ„¢ socket
- Connection 2: 1 x CEE 7/16 plug
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 2.0 A
- Output PD 3.1: 5.0 V / 9.0 V / 12.0 V / 15.0 V / 3.0 A, 20.0 V / 28.0 V / 5.0 A
- Output power: max. 140.0 W total
- Average efficiency during operation 89.75 %
- Efficiency at low load (10 %) 87.28 %
- Power consumption at no load 0.182 W
- USB Power Delivery (PD) 3.1
- Overload protection
- Overcurrent protection
- Overheating protection
- Short-circuit protection
- Colour: white
- Dimensions without plug (LxWxH): approx. 113 x 75 x 35 mm
This USB charger by Delock can be used to supply a USB device with power. The port is equipped with USB Type-Câ„¢ Power Delivery (PD 3.1), allowing supported devices to be charged with up to 140 watts.
USB-PD Version 3.1
The USB PD 3.1 specification defines the voltage levels 28, 36 and 48 volts with support for Extended Power Range (EPR) with 5 amps each. With a calculated maximum power of 240 W (48 V / 5 A), other device classes can also be supplied with power in addition to powerful notebooks and desktop PCs. The Delock charger is characterised by an output power of 28 V and 5 A.
GaN technology
The use of GaN (gallium nitride) transistors increases the efficiency compared to conventional silicon technology. This means that a high output power can be achieved even with very compact dimensions.
Note
For EPR mode (28, 36, 48 V / 5 A), a USB cable with a corresponding E-marker is mandatory. If this E-marker is not available, max. 3 A are transmitted.
Corresponding cables from Delock are optionally available.
Technical data
- Connection 1: 1 x USB Type-Câ„¢ socket
- Connection 2: 1 x CEE 7/16 plug
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 2.0 A
- Output PD 3.1: 5.0 V / 9.0 V / 12.0 V / 15.0 V / 3.0 A, 20.0 V / 28.0 V / 5.0 A
- Output power: max. 140.0 W total
- Average efficiency during operation 89.75 %
- Efficiency at low load (10 %) 87.28 %
- Power consumption at no load 0.182 W
- USB Power Delivery (PD) 3.1
- Overload protection
- Overcurrent protection
- Overheating protection
- Short-circuit protection
- Colour: white
- Dimensions without plug (LxWxH): approx. 113 x 75 x 35 mm
