A-EPNT-0004-V1-17 - Outdoor Router Housing IP76, 4x4 MIMO LTE/5G & 2x2 MIMO WiFi Antenna

The ePoynt-4 series transforms the antenna enclosure into an outdoor customer premises equipment (CPE). The enclosures can accommodate routers with dimensions of up to 140 x 120 x 50mm.

If your router can be powered via PoE, then you are now able to cover longer distances between the location of your antenna and the customer. This is because instead of the limitations of coaxial cables, you now run LAN cables and can use much longer cable lengths.

The cellular 5G/LTE antennas are broadband and operate from 617 to 4200 MHz, covering the main 5G/LTE bands with excellent gain across all frequencies. The Wi-Fi antennas offer dual-band operation and cover the 2.4 GHz and 5 to 7.2 GHz Wi-Fi bands with a peak gain of 5 dBi.

The EPNT-4 is also fully salt water protected, allowing it to be used in highly corrosive environments, including chemical and toxic environments, thanks to the UV-stable ASA radome material. The housing also features a robust mechanical design to withstand adverse weather conditions, making the EPNT-4 vandal and weather resistant (IP67 & IK10).

Highlights

• Broadband mobile coverage from 617 to 4200 MHz, with up to 4x4 MIMO
• Dual-band Wi-Fi at 2.4 and 5 to 7.2 GHz with up to 4x4 MIMO
• Cleverly designed, decorrelated antennas provide excellent MIMO performance in both cellular and Wi-Fi bands
• Includes a high-performance GPS/GLONASS antenna
• Precise mechanical design provides ruggedness, water and dust protection (IP67)
• Wall, pole and surface mounting possible

Applications

• Industrial factory automation, robotics and other M2M systems Telemetry
• Agricultural automation such as M2M and IoT
• Broadband mobile-to-Wi-Fi distribution for marine/boating (inland and coastal vessels)
• Outdoor antenna for Fixed Wireless Access (FWA)
• 5G/LTE consumer internet connectivity
• Industrial and commercial 5G/LTE deployment

Electrical specifications - Mobile radio

• Frequency bands: 617 - 960 MHz, 1427 - 1517 MHz, 1710 - 2700 MHz, 3400 - 4200 MHz
• Gain (max.): 1 dBi at 617 - 960 MHz, 2 dBi at 1427 - 1517 MHz, 3 dBi at 1710 - 2700 MHz, 0 dBi at 3400 - 4200 MHz
• VSWR: <3:1
• Feed-in power: 10 W
• Input impedance: 50 Ohm (nominal)
• Polarisation: Cell 1: ±45° cross-polarised, Cell 2: ±45° cross-polarised
• Grounding: Yes

Electrical specifications - WLAN

• Frequency: 2400 - 2500 MHz, 5000 - 7200 MHz
• Gain (max.): 2.2 dBi at 2400 - 2500 MHz, 5 dBi at 5000 - 7200 MHz
• VSWR: <2.5:1 over 90 % of the band
• Input power: 10 W
• Nominal input impedance: 50 Ohm (nominal)
• Polarisation: Wi-Fi (main): Vertical and horizontal cross-polarised; Wi-Fi (Aux): ±45° cross-polarised
• Grounding: Yes

Mechanical specifications

• Product dimensions: 351 x 238 x 182 mm
• Maximum router dimensions: 140 x 120 x 50 mm
• Packaging dimensions: 405 x 280 x 200 mm
• Radome material: UV-stable ASA
• Radome colour: brilliant white Pantone P 179-1C
• Mounting type: wall/pole and surface mounting

Environmental specifications, certifications and approvals

• Wind resistance of the antenna: ≤220 km/h
• Wind resistance of the included bracket: ≤190 km/h
• Wind resistance of optional bracket/surface mount: ≤220 km/h
• Temperature range (operating): -40 °C to +80 °C
• Environmental conditions: Outdoor/Indoor
• Protection class: IP67
• Salt spray: MIL-STD 810G/ASTM B117
• Relative humidity in operation: Up to 98 %
• Storage humidity: 5% to 95%, non-condensing
• Storage temperature: -40°C to +80°C
• Flammability rating of enclosure: UL 94-HB
• Impact resistance: IK 10
• Product safety and environment: Complies with CE and RoHS standards

Scope of delivery

• ePoynt-4 antenna
• Screws for wall mounting
• 3mm Allen key
• 5mm Allen key
• Pipe mount bracket
• Surface mount gasket
• PCB mounting screws
• M6 x 90mm stainless steel U-bolt
• Cable tie
• M6 Nyloc and standard stainless steel nuts
• M6 stainless steel washers