Product Description
RUT240
INDUSTRIAL CELLULAR ROUTER
CONNECTIVITY
- 4G LTE (Cat 4), 3G, 2G
WI-FI
- Wireless Access Point with Hotspot functionality
WAN FAILOVER
- Automatic switching to available Backup connection
RMS
- For remote management, access & VPN services
FEATURES
MOBILE
Mobile module
- 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
3GPP Release
- Release 10/11 depending on the hardware version
Status
- IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS
- SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD
- Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list
- Operator black/white list (by country or separate operators)
Multiple PDN
- Possibility to use different PDNs for multiple network access and services
Band management
- Band lock, Used band status display
APN
- Auto APN
Bridge
- Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
- Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
Wireless mode
- 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi security
- WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
SSID/ESSID
- SSID stealth mode and access control based on MAC address
Wi-Fi users
- Up to 50 simultaneous connections
Wireless Connectivity Features
- Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter
- Whitelist, blacklist
NETWORK
Hotspot
- Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
Routing
- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols
- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support
- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring
- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
- Port forward, traffic rules, custom rules
DHCP
- Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)
- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
- Supported >25 service providers, others can be configured manually
Network backup
- Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing
- Balance Internet traffic over multiple WAN connections
SSHFS
- Possibility to mount remote file system via SSH protocol
ETHERNET
WAN
- 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN
- 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
SECURITY
Authentication
- Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Firewall
- Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
- Port and tag-based VLAN separation
Mobile quota control
- Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter
- Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control
- Flexible access control of SSH, Web interface, CLI and Telnet
VPN
OpenVPN
- Multiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN Encryption
- DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
- BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec
- XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE
- GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP
- Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel
- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN
- Method of building scalable IPsec VPNs
SSTP
- SSTP client instance support
ZeroTier
- ZeroTier VPN client support
WireGuard
- WireGuard VPN client and server support
Tinc
- Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
MODBUS TCP SLAVE
ID range
- Respond to one ID in range [1;255] or any
Allow Remote Access
- Allow access through WAN
Custom registers
- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
Supported functions
- 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
- 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
DATA TO SERVER
Protocol
- HTTP(S), MQTT, Azure MQTT, Kinesis
MQTT GATEWAY
Modbus MQTT Gateway
- Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
Supported modes
- TCP Master, DNP3 Outstation
API
Teltonika Networks Web API (beta) support
- Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data.
MONITORING & MANAGEMENT
WEB UI
- HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
FOTA
- Firmware update from server, automatic notification
SSH
- SSH (v1, v2)
SMS
- SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call
- Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
TR-069
- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT
- MQTT Broker, MQTT publisher
SNMP
- SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC
- Management API over HTTP/HTTPS
RMS
- Teltonika Remote Management System (RMS)
IOT PLATFORMS
Cloud of Things
- Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx
- Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity
- Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
Azure IoT Hub
- Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
SYSTEM CHARACTERISTICS
CPU
- Atheros Hornet, MIPS 24Kc, 400 MHz
RAM
- 64 MB, DDR2
FLASH storage
- 16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI
- Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA
- Update FW
RMS
- Update FW/configuration for multiple devices at once
Keep settings
- Update FW without losing current configuration
Factory settings reset
- A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
FIRMWARE CUSTOMISATION
Operating system
- RutOS (OpenWrt based Linux OS)
Supported languages
- Busybox shell, Lua, C, C++
Development tools
- SDK package with build environment provided
INPUT / OUTPUT
Input
- 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output
- 1 x Digital Output, Open collector output, max output 30 V, 300 mA
Events
- Email, RMS, SMS
I/O juggler
- Allows to set certain I/O conditions to initiate event
POWER
Connector
- 4-pin industrial DC power socket
Input voltage range
- 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)
- Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption
- < 6.5 W Max
PHYSICAL INTERFACES
Ethernet
- 2 x RJ45 ports, 10/100 Mbps
I/O’s
- 1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs
- 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM
- 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power
- 1 x 4-pin power connector
Antennas - 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors
Reset
- Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material
- Aluminium housing, plastic panels
Dimensions (W x H x D)
- 83 x 25 x 74 mm
Weight
- 125 g
Mounting options
- DIN rail, wall mount, flat surface (all require additional kit)
OPERATING ENVIRONMENT
Operating temperature
- -40 °C to 75 °C
Operating humidity
- 10% to 90% non-condensing
Ingress Protection Rating
- IP30
Operating humidity
- 10% to 90% non-condensing
REGULATORY & TYPE APPROVALS
Regulatory
- CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Certified, Anatel, GCF, REACH, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL)
Operator
- AT&T, Verizon
EMC EMISSIONS & IMMUNITY
IMMUNITY Standards
- Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
- FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
ESD
- EN 61000-4-2:2009
Radiated Immunity
- EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT
- EN 61000-4-4:2012
Surge immunity (AC Power Line)
- EN 61000-4-5:2006
Surge immunity (Ethernet ports)
- EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS
- EN 61000-4-6:2009
DIP
- EN 61000-4-11:2004
RF
Standards
- EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
- FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
- RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
- AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
SAFETY
Standards
- IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
- AS/NZS 60950.1:2015
- EN 50665:2017, EN 62311:2008
- FCC 47 CFR Part 1 1.1310
- RSS-102 Issue 5 (2015)